1321 SE EVERETT MALL WAY ANGRY CRAB SHACK 2024-01-08

Part 2 —Automatic Functional Test: PASS FAIL N/A 1. Reset System - The contractor shall reset the system and ensure that the ❑ ❑ ❑ equipment under the hood is on and power/gas is being supplied. 2. Activate Fusible Link - Initiate the automatic functional test by having the ❑ ❑ ❑ contractor activate the most remote fusible link or detector. 3. Fire Alarm Activation - If the building is equipped with a fire alarm system, did the ❑ ❑ ❑ activation of the system activate local notification device/bell and activate an alarm signal (clearly illustrating the type and location of alarm) at the fire alarm panel? 4. Power & Fuel Shutdown - Did the activation of the system shut down power and ❑ ❑ ❑ fuel supply to ALL equipment protected under the hood and the makeup air suppling the hood? Does it have to be manually reset after system activation? 5. Exhaust Fan - Did the activation of the system turn on or keep on the exhaust fan ❑ ❑ ❑ and did they continue to operate during and after then system discharge? 6. Visual Indicator - Did the visual indicator on the control head illustrate that the ❑ ❑ ❑ system has operated? Returning System to Operational Condition PASS FAIL N/A 1. Operational Conditions - After completion of all functional testing, the following ❑ ❑ ❑ shall be done to return the system to operational conditions: • Each agent tank shall be reconnected. • All power/gas has been restored. • If the system is connected to an alarm, the alarm shall be taken off test. • All cooking equipment shall be in its approved locations. • All grease filters shall be installed. • The contractor verifies that the system is fully operational. 2. NFPA 17 Report - Prior to final approval the installing contractor shall complete, ❑ ❑ ❑ sign, and provide a copy of the NFPA 17A acceptance test report. Fire Marshal's Office 425.257.8100 1 everettwa.gov/fire INFORMATION HANDOUT C-10 4.29.2020 1 Page 7