2812 BAKER AVE 2023-12-01 - Laserfiche WebLink

Option 2A Infiltration Trench Design Worksheet BMP T5.10A Roof Downspout Full Infiltration Downspout full infiltration systems are trench or drywell designs intended for use in infiltrating runofffrom roof downspout drains. They are not designed to directly infiltrate runoff from pollutant generating impervious surfaces. Projects that infiltrate runoff from pollutant generating surfaces must provide treatment prior to infiltration. Infiltration Trench The minimum trench length is based upon the soil type in the location of the infiltration trench. The soils reportwill provide the USDA Soil Type. Thetable below provides the minimum trench length per 1,000 fta of contributing impervious area. Infiltration trenches shall be designed in accordance with the SWMMWW. Trench length required (ft) = Impervious area (ftt) *((minimum trench length)(ft)) 1000 (fts) • Net new impervious area requiring mitigation(Rr): 2296 • USDA Soil Type per soils report • Trench length required: (Trench length cannot exceed 100 R. If length exceeds 100 R, multiple trenches will be required.) • Number of trenches: r Trenm. 4 n wme • Length of each trench: 100f The following setback and design requirements have been met: I. The maximum length of the trench shall not exceed 100 feet from the inlet sump. ✓ 2. The minimum spacing between trench centerlines shall be 6 feet 3. Infiltration trenches should not be built on slopes steeper than 25% (4:1). A geotechnical analysis and report may be required on slopes over 15%, or if the proposed trench is located within 200 feet of the top of a slope steeper than 40%, or in a landslide hazard area. 100 City ofEvereb Public Wads Small Pmect Slwmw ar Site Plen Reporl forPnyects in 13 Me Corndned Sewer AreaSeplembw 2022