Laserfiche WebLink
Best Management Practices (BMPs) to be used: <br />• BMP C120: Temporary & Permanent Seeding <br />• BMP C123: Plastic Covering <br />• BMP C140: Dust Control <br />6-PROTECT SLOPES <br />Them are no cut or fill slopes with this project. <br />Best Management Practices (BMPs) to be used: <br />• None required <br />7-PROTECT DRAIN INLETS <br />There are no existing catch basins on or within the immediate vicinity of the project site <br />that will be affected by the proposed project. Therefore, them is no requirement for <br />protecting permanent drainage inlets. <br />Best Management Practices (BMPs) to be used <br />• None Required <br />MTABILIZE CHANNELS AND OUTLETS <br />There are no existing channels and the proposed construction does not create new <br />channels. <br />Best Management Practices (BMPs) to be used <br />• None Required <br />9-CONTROL POLLUTANTS <br />Any and all chemicals, liquid projects, petroleum projects, and other materials that have <br />the potential to pose a threat to human or the environment will be covered, contained and <br />protected from vandalism. All such products will either be locked in a trailer or locked in <br />a leak proof container. Any on -site fueling will have secondary containment to prevent <br />possibility of spills. Any heavy equipment/vehicles will only be on -site temporarily. <br />Any spills will be cleaned immediately. Fertilizers and pesticides will be applied per the <br />manufacturers label requirements for application rate and procedures. No pH modifying <br />sources such as cement kiln dust, fly ash, concrete washing treatment, curing waters, etc. <br />are anticipated; if however they are, we will contain and/or remove the polluted substance <br />from the site per manufacturer's recommendations. <br />Best MaM mend Practices (BMPs) to be used <br />• BMP C151: Concrete Handling <br />• BMP C153: Material, Delivery, Storage and Containment <br />• BMP C154: Concrete Washout Area <br />