Laserfiche WebLink
SmartOneO <br />Addressable Relay Output Device <br />K-76-018 <br />FEATURES <br />• Full -Digital Communications <br />• Addressable Control Point <br />• Unpowered, SPDT Relay Contacts <br />• Control -by -Event And/or By Time Operation <br />• Status Indicator <br />• Unique Internal Supervision <br />• UL Listed <br />• FM Approved <br />• CSFM Approved <br />DESCRIPTION <br />The SmartOnee Addressable Relay Output Device (AO) is an <br />addressable output module for control of auxiliary equipment <br />such as air handlers, door release and elevator recall. <br />The AO connects directly to a compatible control unit's Signaling <br />Line Circuit (SLC) and contains a SPDT relay to control auxiliary <br />equipment. All of the electronics are contained in a small high - <br />impact polymer case. This creates a small and durable device for <br />installation. A silicone -free module is available for applications <br />where silicone is not desired. The AO can be mounted in a North <br />American 1-1/2-in. (64 mm) deep 1-gang box, or standard 4-in. <br />square box 1-1/2-in. (38 mm) deep with a cover. <br />FIELD PROGRAMMING <br />The AO is field programmable with a unique 3-digit address and a <br />40-character owner location message. The AO relay may be set <br />or reset on command from the control unit. In addition to combi- <br />national -logic programming that utilizes system inputs (i.e., <br />events) to activate this device, the unit may be programmed for <br />real-time clock operation. The real-time clock programming <br />permits the AO to be activated and deactivated by the time of day, <br />calendar date and day of the week. <br />SUPERVISION <br />The AO is continuously monitored for: <br />• Internal power supply voltages <br />• Faulty entering of data into AO's memory <br />• Relay state equals command state <br />An internal set of relay contacts provides a feedback signal that <br />confirms the activation of the addressable relay output. If the <br />relay fails to operate at the appropriate time, the device transmits <br />a trouble report for display by the control unit. <br />STATUS LED <br />A status LED is mounted on the unit. <br />ORDERING INFORMATION <br />�AO Control Module 70-408004-001 <br />AO Control Module, non -silicone 70-408014-001 <br />SmartOne and ARIES are registered trademarks of Kidde-Fenwal, Inc., or its <br />parents, subsidiaries or affiliates. <br />or Kidde <br />Fire Systems <br />Effective: May 2020 <br />SPECIFICATIONS <br />Input Voltage: <br />24 VDC (nominal) <br />Standby Current: <br />500 pA, Typical <br />Alarm Current: <br />500 pA, Typical <br />Contact Ratings: <br />Resistive: <br />2 A @ 30 VDC <br />Inductive (Motor Control): <br />1.0 A @ 30 VDC, 0.60 PF <br />0.6 A @ 120 VAC, 0.35 PF <br />Pilot Duty: <br />0.6 A @ 30 VDC, 0.35 PF <br />Operating Environment: <br />-31 to 151 °F (-35 to 66°C) at <br />0 to 95% RH <br />EMI Immunity: <br />Meets UL 864 <br />LED Pulse Modes: <br />Normal: <br />9 second interval <br />Trouble: <br />LED is off <br />Alarm: <br />2 second interval <br />Wire Sizes: <br />14, 16, 18 AWG Acceptable <br />Dimensions: <br />2.3" x 1.8" x 0.8" nominal <br />Shipping Weight: <br />5.1 oz (145 g) <br />COMPATIBLE CONTROL UNITS <br />Fire Alarm Control <br />Unit (FACU) Type <br />Current <br />Product <br />Legacy <br />Product <br />Single Loop <br />ARIES®-SLX <br />ARIES <br />T" <br />FenwaINET 6000 <br />PEGAsysTI <br />FenwaINET 2000 <br />Multiple Loop <br />ARIES®-MLX <br />ARIES NETLink <br />FenwaINET 8000-ML <br />PEGAsys * <br />FenwaINET 2000 <br />* FACUs running software revision 82.4 are compatibility -tested but <br />not agency listed with the device(s) in this data sheet. <br />This literature is provided for informational purposes only. KIDDE-FENWAL, INC. believes this data to be accurate, but it is published and presented without any <br />guarantee or warranty whatsoever. KIDDE-FENWAL, INC. assumes no responsibility for the product's suitability for a particular application. The fire suppression system <br />design, installation, maintenance, service and troubleshooting must be performed by trained, authorized Kidde Fire Systems distributors for the product to work correctly. <br />If you need more information on this product, or if you have a particular problem or question, contact: <br />KIDDE-FENWAL, INC., Ashland, MA 01721 USA, Telephone: (508) 881-2000. <br />or Kidde K-76-018 Rev AB <br />Fire Systems ©2020 Kidde-Fenwal, Inc. <br />EXPORT INFORMATION (USA) <br />Jurisdiction: EAR <br />Classification: EAR99 <br />This document contains technical <br />data subject to the EAR. <br />Kidde Fire Systems <br />400 Main Street <br />Ashland, MA 01721 <br />Ph: 508.881.2000 <br />Fax: 508.881.8920 <br />www.kiddefiresystems.com <br />