2520 MADISON ST SUNRISE CONVALESCENT CENTER 2025-08-08

Part 2—Automatic Functional Test: PASS FAIL N/A 1. Reset System-The contractor shall reset the system and ensure that the El ❑ F1 equipment under the hood is on and power/gas is being supplied. 2. Activate Fusible Link-Initiate the automatic functional test by having the D El El contractor activate the most remote fusible link or detector. 3. Fire Alarm Activation-If the building is equipped with a fire alarm system,did the E] 1-1 activation of the system activate local notification device/bell and activate an alarm signal(clearly illustrating the type and location of alarm) at the fire alarm panel? 4. Power& Fuel Shutdown-Did the activation of the system shut down power and fuel supply to ALL equipment protected under the hood and the makeup air suppling the hood?Does it have to be manually reset after system activation? 5. Exhaust Fan-Did the activation of the system turn on or keep on the exhaust fan and did they continue to operate during and after then system discharge? 6. Visual Indicator-Did the visual indicator on the control head illustrate that the El El El system has operated? Returning System to Operational Condition PASS FAIL N/A 1. Operational Conditions-After completion of all functional testing,the following El F] 0 shall be done to return the system to operational conditions: • Each agent tank shall be reconnected. • All power/gas has been restored. • If the system is connected to an alarm,the alarm shall be taken off test. • All cooking equipment shall be in its approved locations. • All grease filters shall be installed. • The contractor verifies that the system is fully operational. 2. NFPA 17 Report-Prior to final approval the installing contractor shall complete, sign, and provide a copy of the NFPA 17A acceptance test report. Fire Marshal's Office 1425.257.8100 1 everelthva.gov/fire I INFORMATION HANDOUT C-10 14.29.2020 I Pap]