Laserfiche WebLink
Rfab Paperless Filter <br />Disassembly and Reassembly of Paperless Filter <br />Disassembly <br />1. Grasp the frame with your thumbs on the handles at the corner of the assembly and pull <br />outward in opposite directions to separate the frame at the corner. Continue to open the <br />frame (it will pivot at the opposite corner) until the outer screens and grid can be removed <br />from the frame. <br />2. Separate the outer screens and grid. <br />PAPERLESS FILTER ASS'Y <br />Cleaning: EASY TO CLEAN — NO SPECIAL CLEANERS — CLEAN ONCE A DAY <br />1. Clean the two frame pieces, clean out screens with hot water from a spray nozzle. The <br />groove in the seal frame pieces can be cleaned with the edge of a Scotch-BriteTM or <br />similar cleaning pad. <br />2. Allow all filter assembly components to air dry or thoroughly dry with clean towels before <br />reassembling. <br />Reassembly: <br />1. Place the two outer screens together and align their edges. <br />2. Insert the screens into one of the frame halves (it doesn't matter which one). Ensure that <br />the fitting in the bottom screen is on the opposite side of the frame from the handle. <br />3. Slip the grid between the screens, ensuring that the grid is centered between the edges <br />of the screens. <br />4. Connect the other half of the frame at the corner opposite the handles and pivot the frame <br />onto the free edges of the screen. <br />5. Replace into clean filter pan. <br />Page #19 <br />