Ordinance 2397-99 - Laserfiche WebLink

Section 45: Section 27 of Ordinance No. 1671-89, as amended (EMC Chapter 19.27), is hereby amended by the addition of the following, to be codified as EMC 19.27.040: 27.040 Map number 27-1, Aggregates extraction, related manufacturing activity. The following regulations shall apply to the area identified by Map No. 27-1: A. Manufacturing activities which comply with the standards of the M-1 zone shall be permitted subject to Review Process I. B. Related manufacturing includes asphalt or concrete batch plants, cement products manufacturing, and other similar activities related to aggregates mining occurring on site. C. Related manufacturing activities existing as of January 13, 1990 may continue in the same capacity. Any change in the type of manufacturing activities on such sites which do not comply with the M-1 zone permitted uses and standards shall be subject to review process III, and shall be limited to the area indicated by map number 27-1. The Review Authority shall establish additional standards and may impose conditions which are necessary to make such manufacturing areas compatible with surrounding properties. D. Areas reclaimed from aggregates mining shall be limited to other permitted M-1 uses and subject to the standards of the M-1 zone. Section 46: Section 28 of Ordinance No. 1671-89, as amended(EMC Chapter 19.28), is hereby amended by the addition of the following, which shall be codified as EMC 19.28.010. 28.010 Basic Development Standards. See Table 6.1 in Chapter 6 for the basic development standard that apply to uses hereafter established in the M-M Zone. Additional development standards are listed in Section 28.020. Section 47: Section 28.020 of Ordinance No. 1671-89, as amended by Section 15 of Ordinance No. 1849-92, (EMC 19.28.020), which reads as follows: 28.020 Additional Development Standards in the M-M Zone. A. Building Design. 1. Exterior building materials shall be selected so as not to project or reflect natural or artificial lighting or glare into residential areas. 2. Mechanical equipment located on the roof, facade, or external portion of a building shall be architecturally screened by including the equipment in the building or site design so as not to be visible from adjacent properties or public streets.