815 SIEVERS-DUECY BLVD 2025-05-05

L1 During Construction (Emergency Access) Code Requirement: All required Fire Department Access Roads shall be installed to an extent that will provide all-weather paved access for emergency vehicles prior to combustibles being brought to the site or combustible construction taking place.The Fire Code Official shall determine the adequacy of the access roads during construction. Prior to final approval for any development project, fire department access roads shall be completed with all markings, signage and striping. ❑X Electronically Operated Gates Code Requirement: Override Key-Gates electronic controlled shall have an approved fire department override key switch (Knox).Activation of an approved key switch for an electronically controlled gate shall open the gate/gates to the fully open position within 10 seconds and remain in the open position until reset by EFD personnel. Strobe Light Sensors- In addition to the Key Switch (Knox), gates accessing more than three residences or residential lots, or gates accessing hazardous, institutional, educational, multi-family or assembly occupancy group structures, shall be equipped with an approved automatic traffic control-activating strobe light sensor capable of detecting emergency vehicle pulsing strobe lights (Tomar)from any direction of vehicle approach (interior and exterior), overriding all commands and opening the gate(s). Fail Safe Operations- In the event of a power failure, including battery back-up,the gate(s)shall automatically open, by spring tension or other non-electrical method, or the gate must be capable of being pushed open without additional steps having to be performed. Gate Setbacks (Stacking Lane) - Entry gates shall be set back from the nearest curb line of any public or private street to provide a minimum 30 feet from face of curb or from back of sidewalk when there is a sidewalk, as to not obstruct vehicular or pedestrian traffic. In cases where the gate swings in the direction of the staged fire apparatus the additional distance shall be accounted for and the setback increased. 0 Manually(Non-Automatic)Operated Gates Code Requirement: All manually operated gates shall comply with the following: • Gate width shall be a minimum of 20 feet unobstructed. When open, gates shall not obstruct any portion of the required width of the driveway or access road. • Entry gates shall be set back from the nearest curb line of any public or private street to provide a minimum 30 feet from face of curb or from back of sidewalk when there is a sidewalk, as to not obstruct vehicular or pedestrian traffic. In cases where the gate swings in the direction of I la Page 12 of 20 Project No. REV120-036, REVI20-037, REVI20-038 EVERETT