Laserfiche WebLink
the staged fire apparatus the additional distance shall be accounted for <br /> and the setback increased. <br /> • Designed to remain in the open position when left unattended. <br /> • No chain or cable will be permitted to be used as a method to gate a fire <br /> access roadway. <br /> • Gates provided for secondary fire department access and are not <br /> commonly used shall be suppled with an approved "No Parking Fire <br /> Lane" sign. <br /> • All manual locking mechanisms, such as padlocks, shall be Knox brand <br /> only. <br /> • Manual gates shall be provided with an approved method for <br /> emergency access.Approved methods shall consist of one of the <br /> following: <br /> o High security padlock (Knox Brand) Keyed to EFD emergency <br /> access keyway, or <br /> o Installation of a Knox rapid access key box containing the gate <br /> key. <br /> ■ If a key box is used, it shall be installed on a gate <br /> support pillar or post adjacent to the gate.The box <br /> must be visible to anyone approaching the gate at all <br /> times <br /> Fire Apparatus Access roads/Fire Lane Signs <br /> Code Requirement: <br /> Fire Lane Signs shall comply with the following: <br /> • Metal construction 12 inches wide by 18 inches high <br /> • Red letters on a white reflective background <br /> • Sign shall read "NO PARKING—FIRE LANE—TOW AWAY ZONE—EMC 46.28.130" <br /> • The letters indicating "NO PARKING" and "FIRE LANE" shall be no less than 2 <br /> inches in height. <br /> • The letters indicating "TOW AWAY ZONE" shall be no less than 1 inch in height. <br /> • The letters indicating"EMC 46.28.130" shall be no less than% inch in height. <br /> Placement of signs shall comply with the following: <br /> • One at the beginning of the restriction (one arrow pointing towards the <br /> restriction zone). <br /> • One at the end of the restriction (one arrow pointing back into restriction zone). <br /> • In most cases, both sides of the access road shall be marked. Where long drives <br /> are to be marked,the repetitions shall alternate sides of the drive. <br /> • Signs shall be evenly spaced with a maximum distance between signs no greater <br /> than 75 feet. <br /> ❑X Fire Lane Curb Striping/ Lettering on Curbs <br /> Code Requirement: <br /> All Curb Striping shall be done using Red Traffic Paint, and the striping method shall <br /> comply with the following; <br /> 1.1 Page 13 of 20 <br /> Project No. REVI20-036, REVI20-037, REVI20-038 <br /> EVERETT <br />