Laserfiche WebLink
2.3 Description of Front-Panel Components <br /> 2.3.1 Buttons and Display <br /> The X2 Wave-Flamer is fitted with a two line LCD-Display, with background lighting.This display is the <br /> optical output for the Device Status, as well as the menu handling. <br /> The following control buttons are available next to the Display: <br /> Start-Button <br /> This Button must be pushed after using the ON/OFF Switch, to activate the Device. <br /> Mode/OK-Button <br /> Outside of the Menu,this button can be used to access the Menu. <br /> Inside the Menu, this button is used to confirm. <br /> Discharge/Minus-Button <br /> Outside of the Menu, this Button is used to discharge the Pump (only in Test-Mode). <br /> Inside the Menu, this Button is used as Minus-Button. <br /> Light/Plus-Button <br /> Outside of the Menu, this Button toggles the background light on and off. <br /> Inside the Menu, this Button acts as a Plus-Button. <br /> Test/ESC-Button <br /> Outside of the Menu, a Test signal can be sent to the Transmitter to test the radio <br /> connectivity (only in Test-Mode). <br /> Inside the Menu, this Button is used as an Escape-Button. <br /> 2.3.2 Antenna socket <br /> The antenna is used to receive data. To bend or clamp the antenna or antenna-cable can lead to <br /> severe damage, and should be avoided. Please make sure the antenna is mounted correctly and in an <br /> upright position during a performance, to guarantee the best possible radio connectivity. <br /> Wetness entering the antenna socket can drastically reduce the connectivity. <br />