Laserfiche WebLink
4.3.1.3 Channel 3:Ignition (Starting address+2) <br /> The third channel (starting address +2) activates the actual ignition. If the DMX value on this channel <br /> is higher than 253, the projector will ignite. The DMX-value of this channel must fall below 254, <br /> before an ignition can be made again with the values 254 and 255. <br /> Ignition <br /> DMX-value 0 to 253 254 and 255 <br /> Ignition Device won't ignite Device ignites <br /> 4.3.1.4 Channel 4:Opening time(starting address+3) <br /> The fourth channel (starting address+3) indicates how long the opening time should be.The opening <br /> time can be selected in steps of 10ms,to 2540ms (2,54s) using the DMX-values from 0 to254. <br /> The DMX-value 255 allows a permanent ignition.This ignition ends if the value drops below 254, at <br /> the latest after 2,5 seconds. <br /> The following formula can be used to calculate the opening time t[ms]: <br /> DMX value = t / 10 <br /> Opening time <br /> DMX-value 0 1 2 3 254 1 255 <br /> Opening time Oms 10ms 20ms 30ms 2540ms I permanent <br /> 4.3.1.5 Channel 5:Program (Starting address+4) <br /> The fifth channel (starting address +4) allows you to ignite one of the predefined sequences. Three <br /> DMX-values can be used for one of the ignition channels from the sequence list (see 4.2.1). The <br /> values 0 to 2 are unused; the first sequence (Ignition channel 1) starts with the DMX values 3 to5. <br /> The following formula can be used: <br /> DMX value = 2 + Channelnumber• (255/100) <br /> The following formula can be used for the%value: <br /> % value = Channelnumber <br /> Program/Ignition channel <br /> DMX-value 0 to 2 3 to 5 6 to 7 8 to 10 11 to 12 179 to 181 <br /> value 0 1 2 3 4 ... 70 <br /> Ign.channel N/A 1 2 3 4 70 <br />