1321 COLBY AVE 8TH FLOOR 2024-12-31

TrueAlarm Sensor Bases and Accessories rey-Mm R. M. TrueAlarm sensor bases contain integral addressable electronics that constantly monitor the status of the Base mounted address selection: detachable photoelectric or heat sensors.Each sensor's • Address remains with its programmed location output is digitized and transmitted to the system fire alarm • Accessible from front(DIP switch under sensor) control panel every four seconds. General features: • Automatic identification provides default sensitivity when Since TrueAlarm sensors use the same base,different substituting sensor types sensor types can be easily interchanged to meet specific • Integral red LED for power-on(pulsing),or alarm or trouble location requirements. This feature also allows intentional (steady on) sensor substitution during building construction.When • Locking anti-tamper design mounts on standard outlet box conditions are temporarily dusty,instead of covering the • Magnetically operated functional test smoke sensors(causing them to be disabled),heat sensors may be installed without reprogramming the control panel.Although the control panel will indicate an 4098-9792,Standard Sensor Base incorrect sensor type,the heat sensor will operate at a default sensitivity providing heat detection for building 4098-9789,Sensor Base with wired connections for: protection at that location. • 2098-9808 Remote LED alarm indicator or 4098-9822 relay (relay is unsupervised and requires separate 24 VDC) • • Supervised Relay Bases (not compatible with 2120 CDT): • 4098-9791,4-Wire Sensor Base,use with remote or Electrical Box Requirements:(boxes are by others) locally mounted 2098-9737 relay,requires separate 24 VDC Without relay in the box:4"octagonal or 4"square,1-1/2"deep; • 4098-9780,2-Wire Sensor Base,use with remote or single gang,2"deep locally mounted 4098-9860 relay,no separate power With relay in the box:4"octagonal or 4"square,1-1/2"deep, required with 1-1/2"extension ring • Supervised relay operation is programmable and can be 4"(102 mm)Square Box 4"(102 mm)Octagonal Box manually operated from control panel Surface mount reference • Includes wired connections for remote LED alarm indicator or 4098-9822 relay(relay is unsupervised and requires separate 24 VDC) C { C C • • • • 1-1/2"(3t1F 2098-9737, Remote or local mount supervised relay: minimum box depth Flush mount reference,mount even with final • DPDT contacts for resistive/suppressed loads,power limited surface,or with up to 1/4"(6.4 mm)maximum recess rating of 3 A @ 28 VDC;non-power limited rating of 3 A @ 120 VAC(requires external 24 VDC coil power) (mounts in Supervised Relay in base electrical Relay(mounts (mounts in base electrical box or in base electrical box) 4098-9860, Remote or local mount supervised relay: remotely) • SPDT dry contacts,power limited rating of 2 A @ 30 VDC, resistive;non-power limited rating of 0.5 A @ 125 VAC, resistive Relay Size: 2-1/2"X 1-1/2"X 1- 4098-9822, LED Annunciation Relay: (3.75 in 3)(64 mm X 38 mm X 25.4 mm) • Activates when base LED is on steady,indicating local alarm or trouble 4098-9860 Supervised Relay(mounts in base • DPDT contacts for resistive/suppressed loads ower limited electrical box or remotely; X 8 X 1 X 11/32" >p (1 in )(60.4 mm X 31.8 mm X8.6mm) rating of 2 A @ 28 VDC;non-power limited rating of 1/2 A @ 120 VAC,(requires external 24 VDC coil power) NOTE:Review total wire count,wire size,and accessories being 4098-9832,Adapter plate: wired to determine required box volume. • Required for surface or semi-flush mounting to 4"square electrical box and for surface mounting to 4"octagonal box ��' s-3/s"(1s2 mm) • Can be used for cosmetic retrofitting to existing 6-3/8" f 4098-9832 Adapter Plate,required for diameter base product 1/4" mounting to surface mounted boxes 2098-9808, Remote red LED Alarm (6.4 mm) and 4"square flush box Indicator: i 4-7/8"(124 mm) • Mounts on single gang box(shown in 15/16" illustration to right) ALARM (24 mm) 0 O LL TrueAlarm Bases 9351mplex 4098-9780,4098-9789,4098-9791,&4098-9792 2 S4098-0019-23 8/2017