Laserfiche WebLink
• Installationqualified installers only) <br /> 9. Check the air shutter following the directions below. <br /> Air Shutter Adjustment <br /> Let the heater burn for fifteen minutes (make sure the logs and glass are in place). The flames should be <br /> yellow with no sooting. Adjust the air shutter, if necessary, to achieve the correct looking flame. <br /> Correct Not Enough Air Too Much Air <br /> Flames should be blue at the If the flames are too tall or sooty on the If the flames are all blue and <br /> base,yellow-orange on the top. ends,open the air shutter. short,close the air shutter. <br /> Swing the control cover down to <br /> access the air shutters. LLLI!!� <br /> Front Burner Air Shutter Control <br /> L� (RED) <br /> Left=Less Air <br /> Right=More Air <br /> Rear Burner Air Shutter Control <br /> (GOLD) <br /> Left=Less Air <br /> Right=More Air <br /> 10. Turn the flame to its highest position-the flames should not contact the top of the firebox. Check the flame on low <br /> position. The flames should burn off of each burner hole. If the heater does not work correctly, contact your Travis dealer <br /> for a remedy. <br /> 11. Give this manual to the home owner for future reference and fully explain operation of this heater. <br /> ©Travis Industries 4/19/23- 1443 Greenfield GSR2 <br />