Laserfiche WebLink
Finalizing <br /> the Installation (for <br /> Face and Glass Removal <br /> /A\ A barrier designed to reduce the risk of burns from the hot viewing glass is provided with this <br /> appliance and shall be installed for the protection of children and other at-risk individuals. <br /> 0 If the barrier becomes damaged, the barrier shall be replaced with the manufacturer's barrier for <br /> this appliance (Front Barrier-sku#250-03375, Side Barrier—sku#250-03376) <br /> /A The appliance must be completely cool before removing the glass. <br /> Do not strike or slam the glass. <br /> Open the two latches holding the glass frame in <br /> Oa O place -follow the directions shown below <br /> Lift the stove top off the <br /> stove and place it aside. i <br /> Top of <br /> Firebox <br /> 0 Latch <br /> Glass <br /> Remove the stove front <br /> by lifting it up then <br /> forward. Place it aside. <br /> NOTE: <br /> The metal tabs on the stove front slide <br /> over the tabs on the side castings. r �� <br /> ® Lift the glass frame slightly,swing the top forward,then lift <br /> the glass frame to disengage it from the bottom guides. <br /> Catch <br /> (on glass frame) %� <br /> Glass Frame <br /> Glass Frame Guide <br /> Re-Attaching the Glass Frame: <br /> a)Slide the two brackets on the bottom of the glass frame into the glass frame guides <br /> (hold the glass frame at a slight angle). <br /> b)Swing the glass frame into place-you may have to lift it slightly to allow it to fit over the top of the firebox. <br /> c)Attach the upper latches(follow the instructions above in reverse). <br /> d)Replace the stove front and top. <br /> ©Travis Industries 4/19/23- 1443 Greenfield GSR2 <br />