535 VIEW RIDGE DR 2025-03-31 - Laserfiche WebLink

4- CONSTRUCTION SWPPP 2.5.2 Minimum Requirement#2: Construction Stormwater Pollution Prevention Plan (SWPPP) All new development and redevelopment shall comply with Construction SWPPP Elements #1 through #13 below. 2019 DOE SWMMWW used in developing SWPPP. Projects in which the new, replaced, or new plus replaced impervious surfaces total 2,000 square feet or more, or disturb 7,000 square feet or more of land must prepare a Construction SWPP Plan (SWPPP) as part of the Stormwater Site Plan (see 2.5.1). Each of the 13 elements must be considered and included in the Construction SWPPP unless site conditions render the element unnecessary and the exemption from that element is clearly justified in the narrative of the SWPPP. Projects that add or replace less than 2,000 square feet of impervious surface or disturb less than 7,000 square feet of land are not required to prepare a Construction SWPPP, but must consider all of the 13 Elements of Construction Stormwater Pollution Prevention Plan and develop controls for all elements that pertain to the project site. Element 1:Mark Clearing Limits • Prior to beginning land disturbing activities, including clearing and grading, all clearing limits, sensitive areas and their buffers ,and trees that are to be preserved within the construction areas should be clearly marked, both in the field and on the plans, to prevent damage and offsite impacts. • Plastic, metal, or stake wire fence may be used to mark the clearing limits. The areas of clearing limits required for the construction of the house and driveway are the boundaries of the property will be marked in the field with flagging or fencing. There are three Trees to be saved that will require fencing for protection. Relative BMPs for this Category BMP C101: Preserving Natural Vegetation BMP C102: Buffer Zones BMP C103: High Visibility Fence BMP C233: Silt Fence /0