Laserfiche WebLink
www.boschsecurity.com �oD BOSCH <br />Invented for life <br />When connected to the panel's option bus, the <br />FPP-RNAC-8A-4C adds four additional NACs to the fire <br />panel. The additional NACs can be NFPA 72, Class B or <br />Class A. <br />When connected directly to the NAC output, the <br />FPP-RNAC-8A-4C is a NAC power supply for <br />fire -protective signaling systems. The regulated power <br />supply provides up to 8 A of power used to operate <br />both continuous and intermittent loads. This 8 A of <br />power can be distributed through the four output <br />circuits and auxiliary power circuit. The <br />FPP-RNAC-8A-4C power supply is UL Listed for use in <br />commercial fire alarm applications. <br />Compatible panel connections <br />The FPP-RNAC-8A-4C power supply is compatible with <br />any UL Listed control panel that uses reverse polarity <br />supervised notification outputs with 12 VDC or 24 VDC <br />regulated outputs. It is also compatible with the <br />following Bosch Control Panels. <br />► 8 A of power <br />► Fully supervised, regulated 24 VDC output (nominal) <br />with over -current protection <br />► Configurable for NAC output or constant auxiliary <br />power <br />► Built-in NAC patterns <br />► Four Class B or Class A circuits <br />Panels <br />D7022 Two -zone <br />Conventional FACP <br />D8024 and D10024A Analog <br />FACPs <br />D7024 Four -zone <br />Addressable FACP <br />DS9400i Four -zone FACP <br />DS9400M AddressiFire FACP <br />FPD-7024 Analog <br />Addressable Fire Panels <br />FPA-1000 Analog Addressable <br />Fire Panels <br />Connections <br />For the D7022 conventional panel <br />and the D8024 and D10024A <br />analog panels, the FPP-RNAC-8A-4C <br />connects through a NAC circuit. No <br />option bus connection is necessary. <br />Connect up to two FPP-RNAC-8A-4C <br />power supplies to a D7024, <br />DS9400i, or DS9400M Control <br />Panel. The control panel can <br />individually control each of the four <br />NAC outputs for each power supply. <br />Only the four NAC outputs of a single <br />power supply are synchronized. <br />Connect up to four FPP-RNAC-8A-4C <br />power supplies to an FPD-7024 or <br />an FPA-1000 control panel. Each <br />RNAC's four NAC outputs are <br />synchronized and can be individually <br />controlled for a total of 16 <br />synchronized circuits. <br />