12830 19TH AVE SE 2023 Plans 2025-03-18

• EXPERIENCE THE CARLISLE DIFFERENCE 4RL/SLE SYNTEC SYSTEMS Sure-Weld TPO Reinforced Membrane Heat Aging accelerates the oxidation rate that roughly doubles for each Supplemental Approvals, Statements 18°F(10°C)increase in roof membrane temperature.Oxidation(reaction and Characteristics: with oxygen)is one of the primary chemical degradation mechanisms of 1. Sure Weld TPO meets or exceeds the requirements of roofing materials. ASTM D6878 Standard Specification for Thermoplastic Carlisle Testing— Heat Aging Polyolefin-Based Sheet Roofing. ASTM Requirement Sure-Weld Requirement 2. Sure-Weld TPO membranes conform to requirements of the US E.P.A.Toxic Leachate Test(40 CFR part 136)performed by an ASTM TEST 32 weeks** >128 weeks independent analytical laboratory. 240°F **Heat exposure comparable to 3,120 weeks(60 years)at 185°F for 8 hours/day. 3. Sure Weld TPO was tested for dynamic puncture resistance per ASTM D5635-04 using the most recently modified impact head. » Test specimen is a 2"by 6"(50.8 mm by 152.4 mm)piece of 45-mil 45-mil(1.14 mm)was watertight after an impact energy of 12.5 J (1.14 mm)membrane unbacked,placed in circulating hot-air oven. (9.2 ft-lbf)and 60-mil(1.52 mm)was watertight after 22.5 J(16.6 ft-lbf).80-mil(2.03 mm)Extra was watertight after an impact » Criterion—no visible cracks after bending aged test specimen around energy of 30.0 J(22.1 ft-lbf). 3"(76.2 mm)-diameter mandrel. 4. All FM approved assemblies have been tested to pass FM 4470 for Q-Trac testing combines accelerated weathering with real-world conditions foot traffic resistance. using an array of ten mirrors to reflect and concentrate full spectrum sunlight onto membrane test specimens.The Q-Trac device automatically tracks the sun's path from morning to night.Also,it adjusts to compensate for seasonal changes in the sun's altitude.Eight years in 0-Trac testing is equal to 40 years of real-world exposure.Carlisle requires its Sure-Weld Optional APEEf_'" Protective Film TPO membranes to pass the equivalent of 40 years of exposure in the Q-Trac. Shield Carlisle's Sure-Weld TPO membrane from dirt and scuffs during installation with r) �r Carlisle Testing—Q-Trac APEEL Protective Film.Factory-applied and ASTM D6878 Requirement Sure-Weld Requirement easy to remove,APEEL eliminates the need PROTECTIVE FILM ASTM TEST N/A Equivalent of 40 years for rooftop cleaning upon project completion. N/A of exposure » Ideal for re-roofing,re-cover,and new construction projects Environmental Cycling subjects the membrane to repeated cycles of » Simple and easy to remove heat aging,hot-water immersion,and xenon-arc exposure. » Saves time and money when compared to pressure washing » ASTM requirement—none » Protecting from dirt maintains maximum membrane reflectivity • Carlisle Extreme test*: and long-term performance - 10 days heat aging at 240°F(116°C)followed by Installation - 5 days water immersion at 158°F(70°C)followed by Simply order membrane with APEEL,install,and remove the film to - 5,040 kJ/m2(2000 hours at 0.70 W/m2 irradiance) reveal a clean,new roof. xenon-arc exposure » APEEL Protective Film should be removed from within areas *Test specimen is 2.75"(69.85 mm by 140 mm)by 5.5"piece of that are to be heat welded together.In areas that do not require membrane with edges sealed. heat-welding,the APEEL Protective Film can be left in place for up to 90 days without degrading due to its excellent heat-and *Criterion—after 3 complete cycles,test specimens shall remain UV-resistance. flexible and not have any cracking under 10x magnification while » When the installation of the entire TPO roofing system is wrapped around a 3"(76.2 mm)-diameter mandrel. complete,remove and discard the APEEL Protective Film. 800-479-6832 I P.O.Box 7000 I Carlisle,PA 17013 I Fax:717-245-7053 I www.cariislesyntec.com