7100 HARDESON RD 2021 Plans 2025-03-19

NOTI FI E R° by Honeywell FCPS-24S6 & FCPS-24S8 Series Remote Power Supplies The FCPS-24S6 Series (6-amp) and FCPS-24S8 Series (8-amp) are remote power supplies with battery charger. The FCPS-24S6/- 24S8 may be connected to any 12 or 24 volt fire alarm control panel (FACP) or may be used as stand-alone supplies. Primary applica- tions include notification appliance circuit(NAC)expansion (to sup- port ADA requirements and NAC synchronization)or auxiliary power to support 24 volt system accessories.The FCPS-24S6/-24S8 pro- vides regulated and filtered 24 VDC power to four notification appli- ance circuits configured as either four Class B (Style Y)or Class A (Style Z, with ZNAC-4 option module).Alternately, the four outputs may be configured as all non-resettable, all resettable or two non- f Fees-z«6;- resettable and two resettable.The FCPS-24S6/-2458 also containsa a battery charger capable of charging up to 18 AH batteries. The , _ - FCPS-24S6C and FCPS-24S8C are ULC-listed. �. NOTE: Unless otherwise specified, the terms FCPS-24S6 and FCPS- ®_. 2458 used in this document refers to the FCPS-24S6 and FCPS-24S8, FCPS-24S6C and FCPS-24S8C, the FCPS-24S6E and FCPS-24S8E. Features • UL-Listed NAC synchronization using System Sensor®, Whee- lock®,or Gentex®"Commander2"appliances • Operates as a "sync-follower" or as a "sync-generator" (default) See note on page 2. • Contains two fully-isolated input/control circuits - triggered from FACP NAC (NAC expander mode) or jumped permanently"ON" (stand-alone mode) • Four Class B (Style Y) or four Class A (Style Z, with ZNAC-4 Specifications module)NACs Primary(AC)Power: • 6-amp(FCPS-24S6)or 8-amp(FCPS-24S8)full load output,with 3 amps maximum/circuit, in NAC expander mode(UL 864) • FCPS-24S6/-24S8: 120 VAC,60 Hz,3.2A maximum • 4-amp(FCPS-24S6)or 6-amp(FCPS-2458)continuous output in FCPS-24S6C/-24S8C: 120 VAC,60 Hz, 3.2A maximum stand-alone mode(UL 1481) • FCPS-24S6E/-24S8E:240 VAC, 50 Hz, 1.6A maximum • Compatible with coded inputs;signals passed through • Wire Size: minimum#14 AWG (2.0mm2)with 600 V insulation • Optional power-supervision relay(EOLR-1) Control Input Circuit: • In stand-alone mode,output power circuits may be configured as: • Trigger Input Voltage:9 to 32 VDC resettable, (reset line from FACP required), non-resettable, or a • Trigger Current:2.0 mA(16-32 V); Per Input: 1.0 mA(9- 16 V) mix of two and two Trouble Contact Rating: 5 A at 24 VDC • Fully regulated and filtered power output - optimal for powering four-wire smoke detectors, annunciators, and other system Auxiliary Power Output: Special application power 500 mA maxi- peripherals requiring regulated/filtered power mum • Power-limiting technology meets UL power-limiting requirements Output Circuits: • Form-C normally-closed trouble relay • +24 VDC filtered, regulated • Fully supervised power supply, battery,and NACs • 3.0 A maximum for any one circuit • Selectable earth fault detection • Total continuous current for all outputs(stand-alone mode): • AC trouble report selectable for immediate 2-hour delay —FCPS-24S6:4.0 A maximum • Works with virtually any UL 864 fire alarm control which utilizes —FCPS-2458:6.0 A maximum an industry-standard reverse-polarity notification circuit(including • Total short-term current for all outputs(NAC expander mode): unfiltered and unregulated NAC power) • Requires input trigger voltage of 9-32 VDC —FCPS 24S6:6.0 A maximum • Self-contained in compact, locking cabinet - 15"H x 14.5"W x —FCPS-2458: 8.0 A maximum 2.75"D(cm:38.1H x 36.83W x 6.985D) Secondary Power(Battery)Charging Circuit: • Includes integral battery charger capable of charging up to 18 AH • Supports lead-acid batteries only batteries. Cabinet capable of housing 7.0 AH batteries • Float-charge voltage:27.6 VDC • Battery charger may be disabled via DIP switch for applications • Maximum current charge: 1.5 A requiring larger batteries • Maximum battery capacity: 18 AH • Fixed, clamp-type terminal blocks accommodate up to 12 AWG (3.1mm2)wire DN-6927:A3•11/4/2019—Page 1 of 2