1509 CALIFORNIA ST DAWSON PLACE 2025-04-07

Operable Partitions MODEL 3030SPECIFICATIONS K II '• ' 2.06 PERIMETER TRIM AND SEALS A.Vertical Trim and Seals:Panels shall have vertical astragals 3.Optional Adjustable Starter Jamb:consisting of an containing flexible vinyl seals and incorporate reversible tongue aluminum extrusion which is permanently mounted to a and-groove-type configurations for positive interlocking with structural wall surface and is field-adjustable to compensate adjacent panels.Vertical astragal type shall be(select): for out-of-plumb conditions of the fixed wall.The Adjustable Starter Jamb shall incorporate a tongue-and-groove-type 1.Standard Trimless Astragal:consisting of an aluminum vertical astragal for positive interlocking with the lead panel. extrusion with tongue-and-groove-type vertical astragals. B.Final Closure System:The final closure panel(the last panel Vertical trim shall not be permitted on the panel faces,resulting exiting the stack)shall form a seal vertically against a rigid wall in a minimal groove appearance between adjacent panels. surface.The type of final closure panel shall be(select): 2.Optional Cap-type Astragal:consisting of an aluminum extrusion 1.Standard Expander Panel Closure:consisting of an expander with tongue-and groove-type vertical astragals for protecting the mechanism with a nominal 5"[1271 of travel,activated from finish material and substrate along the vertical edge of the panel. the face of the panel using a removable wrench as supplied B.Horizontal Top Trim and Seals:Top seals shall consist of flexible by manufacturer.The Expander Panel shall be equipped vinyl sweep seals installed on both sides of the panel.The seals with an adjustable bottom seal(standard)or(optional) shall consist of a compressed bulb between two(2)fingers of operable bottom seal,and a flush pull handle. vinyl.Top seal type shall be(select): 2.Optional Hinged Panel(s)Closure:consisting of a half panel 1.Standard Fixed Top Seals:consisting of continuous-contact hinged permanently and directly to a structural wall surface. flexible vinyl sealing against the bottom flange of the The Hinged Panel(s)shall be equipped with an adjustable overhead track. bottom seal,a lap-type extrusion for sealing against its 2.Optional Operable Top Seals:consisting of an edge-activated adjacent panel(standard)or(optional)expander mechanism seal using a removable wrench as supplied by manufacturer. with a nominal 5"[1271 of travel,activated from the face of Top seals shall provide a maximum 1/2"1131 of travel. the panel using a removable wrench,and a flush pull handle Note:Optional Operable Top Seals are not available with on each side of the panel. 85o Hinged Pairs Steel Track. 3.Optional Communicating Panel Closure:consisting of a full sized panel hinged permanently and directly to a structural C.Horizontal Bottom Trim and Seals:Bottom seals shall consist of wall surface.The Communicating Panel shall function as a multiple fingers of flexible vinyl for positive contact and sealing full height pass door(maximum panel size:S-0"[.91]wide x with various floor surfaces.Bottom seal type shall be(select): 10'-2"[3.1o]high),with an adjustable bottom seal,a lap-type 1.Standard Operable Bottom Seals:consisting of an edge activated extrusion for sealing against its adjacent panel,and a flush seal using a removable wrench as supplied by manufacturer. pull handle on each side of the panel. Bottom seals shall provide 2"150.81 of nominal travel. 4.Optional Three-Panel-Train Closure:consisting of three(3) 2.Optional Adjustable Bottom Seals:consisting of field adjustable, panels hinged together to form a three-panel-train.The last continuous-contact vinyl sweep seals with 2"[50.8]nominal panel in the train shall incorporate an expander mechanism, height with 3/4"[19]of nominal adjustment. activated from the face of the panel with a removable wrench as supplied by manufacturer,that extends a nominal 5"[1271 3.Optional Automatic Bottom Seals:consisting of self-activated to seal against a rigid wall surface.The three(3)panels in the seals providing 2"150.81 of nominal travel. train will be equipped with adjustable bottom seals,and a flush pull handle. D.Horizontal and Vertical Panel Trim:All exposed panel trim and hinges shall be of one(1)similar color(select): 5.Optional Lap Closure:consisting of a pair of panels equipped with bulb seals for sealing against a rigid wall surface on one 1.Dark Bronze. side,and a lap-type extrusion that overlaps with the adjacent 2.Grey. panel on the opposite side.The Lap Closure panel shall be equipped with adjustable bottom seals,and a flush pull 2.07 CLOSURE SYSTEMS handle. A.Initial Closure System:The lead panel(the first panel exiting the 6.Optional Single Panel Expander Closure:consisting of an stack)shall form a seal vertically against a rigid wall surface,as expander mechanism with a nominal 5"[1271 of travel, accomplished by a(select): activated from the face of the panel using a removable 1.Standard Bulb Seal:consisting of continuous-contact, wrench.The Single Panel Expander shall be capable of flexible vinyl bulb seal(s)installed along the vertical edge of rotating 36o"and shall be equipped with an adjustable the lead panel for positive compression against a rigid wall bottom seal(standard)or(optional)operable bottom seal, surface. and a flush pull handle. 2.Optional Fixed Starter Jamb:consisting of an aluminum 7.Optional Pocket Door(s):(see"Series 3000 Pocket Door" extrusion,which is permanently mounted to a structural wall brochure for complete details and specifications). surface.The Fixed Starter Jamb shall incorporate a Note:Optional Automatic Bottom Seal is not available in tongue-and-groove-type vertical astragal for positive conjunction with Final Closure panel(s). interlocking with the lead panel. 4 Dimensions in[]are millimeters.Contact your local distributor for additional assistance or visit www.kwik-wall.com 04-23