Laserfiche WebLink
Construction Stormwater Pollution Prevention Plan Checklist <br /> Project Name: <br /> Construction Permit No. <br /> City Reference No. <br /> Erosion and Sediment Control Facilities <br /> 1. Show the locations of sediment trap(s),pond(s),pipes and structures. <br /> 2. Dimension pond berm widths and inside and outside pond slopes. <br /> 3. _Indicate the trap/pond storage required and the depth,length,and width dimensions. <br /> 4. _Provide typical section views through pond and outlet structure. <br /> 5. _Provide typical details of gravel cone and standpipe, and/or other filtering devices. <br /> 6. Detail stabilization techniques for outlet/inlet. <br /> 7. Detail control/restrictor device location and details. <br /> 8. Specify mulch and/or recommended cover of berms and slopes. <br /> 9. Provide rock specifications and detail for rock check dam(s),if applicable. <br /> 10._Specify spacing for rock check dams as required. <br /> l 1. Provide front and side sections of typical rock check dams. <br /> 12. Indicate the locations and provide details and specifications for silt fabric. <br /> 13. Locate the construction entrance and provide a detail. <br /> Detailed Drawings <br /> 1. Any structural practices used that are not referenced in the Ecology Manual should <br /> be explained and illustrated with detailed drawings. <br /> Other Pollutant BMPs <br /> 1. _Indicate on the site plan the location of BMPs to be used for the control of pollutants <br /> other than sediment,e.g.,concrete wash water. <br /> Monitoring Locations <br /> 1. _Indicate on the site plan the water quality sampling locations to be used for <br /> monitoring water quality on the construction site,if applicable. <br /> Volume II—Construction Stormwater Pollution Prevention-December 2014 <br /> 3-32. <br />