Laserfiche WebLink
Everett – Outdoor Multipurpose Stadium <br /> <br /> Page 2 <br />· Survey shall include, but not be limited to: <br />* Grade Breaks <br />* Limits of Pavement <br />* Pavement type <br />* Curbs and walls <br />* Curb ramps and driveways <br />* Trees (including caliper and type) 6-inch diameter and larger <br />* Limits of shrubs and vegetation <br />* Buildings and Structures. Include finished floor elevations for all ground floor(s) and <br />basements <br />* Fences, rockeries, retaining walls, or similar. Note type, length, width and height at <br />ends and every 20 feet (at midpoint if item is less than 40 feet) <br />* Utility Access Points—Manholes, Catch Basins, cleanouts, etc. <br />* Valve covers, identify irrigation valves separately from water main valves <br />* Light and Power Poles <br />* Fire Hydrants <br />* Signs <br />* Parking and channelization striping <br />* Monuments and survey control points <br />* Property Lines and Easements <br />The survey shall incorporate the following CAD requirements: <br />· All line work and text shall be in model space. Drawing units shall be decimal feet. <br />· Provide the triangulated irregular network (TIN) as a surface within the *.DWG file. The <br />surface should be set to not display any data. <br />· Surface data shall match the contours used in the final print. <br />· All CAD line work shall be “color by layer” and “linetype by layer”. <br />· All CAD elements intended for display in the survey print, including spot elevations and <br />contours, shall be basic CAD elements. Elements created by software like Civil 3D, <br />InRoads, Eaglepoint, etc shall be converted to basic CAD elements. <br />· Contour text shall be on a separate layer from the contours <br />· Contours shall be drawn at actual elevation. <br />· To accurately show contours at the limits of survey, the surveyor shall insure that all <br />contours created by erroneous triangulation of the spot elevations at the limits of survey <br />are removed. <br />· Monuments shall be shown at their true location in model space. If necessary, graphical <br />representations of far away monuments shall be accomplished in paper space. <br />Design-Build Contract for Everett Outdoor Events Center <br />Exhibit C - Phase 1A Work and Fee Proposal