Laserfiche WebLink
7.2 Two Extender Carts <br /> 7.2.1 System Description <br /> The equipment inspected consists of Two Extender Carts <br /> manufactured by El. The equipment is rated at 24VDC, 3 Amps, <br /> 10KA and is used as a AGV extender cart equipped with scanners. <br /> The equipment is installed indoors in an ordinary (non-hazardous) <br /> location, and has been evaluated for use in this location only. <br /> 7.2.2 Grounding <br /> Exposed non-current carrying parts of the equipment were verified <br /> to be effectively grounded in accordance with the applicable <br /> provisions of NEC°, Article 250. <br /> 7.2.3 Guarding of Live Parts <br /> All internal components are enclosed in a grounded, screw closed, <br /> metal enclosure, and are effectively guarded per NEC°, Section <br /> 110.27. <br /> 7.2.4 Overcurrent Protection <br /> Overcurrent protection was provided by a local 3 Amp breaker. <br /> Additional overcurrent protection was provided by devices as <br /> shown on the electrical diagrams. <br /> 7.2.5 Wiring <br /> All wiring was found to be UL listed or recognized type MTW/THHN <br /> or equivalent. <br /> 7.2.6 Equipment Discrepancies <br /> No discrepancies were observed during the evaluation of the <br /> equipment listed in Section 5.0. <br /> 7.3 Two Gantry Cooling Fan Adds Gantry 7 and 8 <br /> 7.3.1 System Description <br /> The equipment inspected consists of Two Gantry Cooling Fan Adds <br /> Gantry 7 and 8 manufactured by El. The equipment is rated at <br /> 24VDC, 1 Amp and motor enclosure on existing labeled Gantry <br /> machine was retrofitted with fans. The equipment is installed <br /> Reference No.: 1108546 Page 7 <br />