Laserfiche WebLink
Proposed Remedial Excavation: 4849 Spire Lane,Everett,WA <br /> December 8,2022 <br /> The excavation support and shoring system used must comply with all applicable safety <br /> requirements. <br /> If sloughing does occur below the adjacent building footing, the structure should remain <br /> stable due to previously installed pipe piles. We recommend that any sloughed area below <br /> the building footing be backfilled with CDF to restore support and fill the voids. <br /> BASELINE SURVEY AND MONITORING <br /> Ground movements may occur as a result of excavation activities. As such, survey <br /> monitoring points should be established on ground surfaces and adjacent structures within <br /> a horizontal distance equal to two times the depth of the excavation. The monitoring points <br /> should be spaced no more than 20 feet apart, and baseline data should be collected before <br /> the start of excavations. Subsequent readings should be taken twice a week during the <br /> excavation and backfill process. <br /> The monitoring program should include changes in both the horizontal(x and y directions) <br /> and vertical deformations. The monitoring should be performed by the project surveyor to <br /> the nearest 0.01-foot, and the results be promptly submitted to the project team for review. <br /> The results of the monitoring will allow the design team to confirm design parameters,and <br /> for the contractor to make adjustments if necessary. <br /> We also recommend that the existing conditions of the adjacent private and public <br /> properties be photo-documented prior to commencing any earthwork at the site. <br /> CONSTRUCTION CONSIDERATIONS <br /> STRUCTURAL BACKFILL <br /> After the excavation has been completed, we understand that it will be backfilled with <br /> structural fill, and the surface restored to its existing condition. Adjacent to the existing <br /> structure, we recommend that CDF be used as backfill. When CDF is not used, we <br /> recommend the imported fill consist of granular material such as WSDOT gravel borrow <br /> (WSDOT Standard Specification 9-03.14(1)), or an approved equivalent. The structural <br /> fill should be moisture conditioned to within about 3 percent of optimum moisture content, <br /> placed in loose, horizontal lifts less than 8 inches in thickness, and systematically <br /> compacted to a dense and relatively unyielding condition and to at least 95 percent of the <br /> 22-389_4849 spire lane everett_iptdocx Page 9 PanGEO, Inc. <br />