|
19.All consoles, furniture, and equipment racks to be provided by others unless noted otherwise.
<br />20.Client will allocate dedicated wall space for EverOn to mount our equipment such as control panels, processor panels, low
<br />voltage power supplies, communications equipment. Typically, this is a contiguous wall space of at least four (4) feet wide
<br />and floor-to-ceiling height. Plywood mounted / painted at this location to be provided by others.
<br />21.Submittals, shop drawings, as-built record drawings and O&M documentation are excluded, unless specifically included in
<br />our scope of work or required by project specifications. If so, included in scope or required by specifications, any such
<br />submittals, drawings and/or documentation shall be in Adobe Portable Document Format (PDF) only, unless specified, in
<br />contract, to be provided by other media means.
<br />22.This proposal only includes the equipment and software noted in the attached equipment list and/or scope of work
<br />description. This design is intended to meet end user requirements, however, in the event of a discrepancy; this document
<br />shall prevail over all others.
<br />23.Any existing equipment to be reused is limited to that included on our scope of work and equipment list. This equipment is
<br />presumed to be in working order and have capacity to accommodate additions or modifications to the respective systems.
<br />We assume no responsibility for warranty of existing equipment to be reused, nor any consequential damages or project
<br />delays due to any failures.
<br />24.Systems Programming and Integration scope of work limited to equipment and/or software included in scope of this
<br />proposal.
<br />25.Data entry of Client specific system information or cardholder data is excluded.
<br />26.This proposal excludes any custom database work, custom development of Graphical User Interfaces, and Maps unless
<br />specifically stated in our scope of work.
<br />27.We have allowed for systems training, by EverOn staff, if specifically noted in the scope of work. Additional training is
<br />available as an option at additional cost.
<br />28.We anticipate that for most equipment, delivery will occur within two (2) to four (4) weeks from date of order. Installation
<br />will normally commence upon receipt of equipment or on a mutually agreed subsequent date.
<br />29.The exact location for all components will be field verified with representatives from EverOn and client or a designee (i.e.,
<br />Architect, General Contractor, etc.).
<br />30.Our proposal does not make allowance for hidden conditions, hazardous materials, or asbestos abatement.
<br />31.EverOn will make every effort to minimize any applicable existing system down time during installation. We will work with
<br />the client to schedule the down time.
<br />32.Roof penetrations, elevator interface, cutting, patching, and painting, blocking, reinforcement, removal and dump fees,
<br />utility charges, demolition of existing equipment or cabling, coordination with utilities, connection to fire alarm or life safety
<br />systems and system monitoring, if applicable, are not included unless specifically stated. To be provided by others.
<br />33.Performance and Payment Bonds, Overtime, Shift Premiums and Prevailing Wages are excluded unless specifically
<br />included in the scope of work.
<br />34.EverOn reserves the right to subcontract all or part of the works as necessary to complete the project per contract.
<br />35.It will be the Customer’s responsibility to provide any special protective clothing or equipment necessary to work in hazard
<br />areas.
<br />36.Security Escorts, where required, will be the responsibility of the Customer and are not included in the costs of this project.
<br />37.Patching and painting are excluded.
<br />38.
<br />Reference use of NASPO ValuePoint Contract: #99SWC-NV23-16259 "Security & Fire Protection Services" and WA State Contract WA DES 24223
<br />CUSTOMER will be responsible for providing any 110VAC required for the proper operation of the security equipment.
<br />CUSTOMER will be responsible for providing and installing one telephone line and jack (RJ31X) within 6 feet of the intrusion
<br />alarm panels, unless using IP DACT or Sole path Cellular unit or Radio.
<br />CUSTOMER will be responsible for providing IT support for Firewall and Port opening on their network when using an IP device.
<br />Unless specifically identified in the scope of work, the estimated cost for the electrical permit or lift rental is not included in the
<br />final prices. These costs will be billed to the CUSTOMER separately.
<br />CUSTOMER will be responsible for providing updated drawings of the facilities. If the new drawings reflect changes not identified
<br />in the original proposal additional charges will be incurred by the CUSTOMER.
<br />CUSTOMER will be responsible for City, County and State alarm permit fees.
<br />Everon will perform the installation, conduct tests and inspections during normal business hours and days: 8AM to 5 PM Mon-
<br />Fri. using standard labor rates excluding Union and prevailing wage rates.
<br />CUSTOMER will be responsible for providing two dedicated loop start telephone lines at location of Fire Alarm Control Panel per
<br />NFPA 72 guidelines.
<br />CUSTOMER will be responsible for providing a dedicated 120 VAC Power Circuit at location of Fire Alarm Control Panel per
<br />NFPA 72 guidelines
<br />Equipment changes or location changes due to CUSTOMER request, or if necessary for the system to operate properly, will be
<br />considered a change order from the original scope of work and billed accordingly at the labor and material rates already in effect
<br />on this contract.
<br />Connection To Existing Equipment: It is mutually understood and agreed that Everon assumes no responsibility whatsoever for
<br />Inclusions/Exclusions
|