Laserfiche WebLink
Vjendo- <br />K <br />SAN� <br />For units with the condensing unit mounted on top, inspect the condenser fins at least once every three months. <br />Brush out or vacuum any dirt or lint that has accumulated in the fins. <br />CLEANING THE CABINET <br />To clean the cabinet and shelves, use a mild detergent and a soft, damp cloth. Rinse with clean water. Do not <br />use paint thinner, laundry detergent, harsh chemicals, or abrasive pads or cleaners. <br />STORING THE CABINET <br />Step 1: Disconnect the unit from its power source. <br />Step 2: Wipe the interior of the RSC with a damp cloth. <br />Step 3: Cap off refrigeration connection lines. <br />Step 4: Unit must be stored indoors in a clean, dry place. Do not choose a location where the unit will be <br />exposed to direct sunlight, high temperature, or high humidity. <br />TROUBLESHOOTING <br />Before calling your Service Technician, please make these simple checks: <br />If the unit is not operating: <br />1. Is there a main -power failure? <br />2. Is there a blown fuse? <br />3. Has the refrigeration unit cycled off, because it is at the designated operating temperature? <br />If the LED light is off: <br />1. Is the LED tube properly connected to the power source? <br />If the cabinet temperature is too warm: <br />1. Is the controller set -point set correctly? <br />2. Is the cabinet located in direct sunlight? <br />3. Is the cabinet located in a strong air -flow path? <br />4. Is the distance between the upper surface of the displayed merchandise and the shelf directly above it at <br />least 1 "? <br />5. Is the air temperature around the cabinet above 80°F? <br />REFER TO THE ENVIRONMENTAL CONSIDERATIONS, ON PAGES 8 AND 9, THAT <br />WILL AFFECT COOLING PERFORMANCE. <br />29 <br />