2300 MERRILL CREEK PKY J L MANUFACTURING 2018-11-19

u � 2012 Washinqton State Ener�i"v Code Compliance Forms for Commercial, GroupT�1, and > 3 storv R2 and R3 2012 Washington State Energy Code Compliance Forms for Commercial, Group R1, and > 3 story R2 and R3 Project Info ProjectAddress 2300 Merrill Creek Parkway Everett WA IAppIIC81lt NafT1B: Lancet�tueller Architects Maximum Allowed Lighting Wattage Location (plan # Building Area room #, or ALL) Area Description Manufacturing � , _ 102 manu£acturing restroom ` Lighting Power Allowances per Table C405.5.2(1) Watts per fiZ * 1.11 Total Revised June 2013 �ate g�26/13 For Building Department Use Area in ftz (watts/ft' x area) 210 233 210 Proposed Lighting Wattage Location (plan #, Fixture Description Number of Watts/ Watts Building Area room #, or ALL) (Include exempt equipment perNote 5) Fixtures Fixture Proposed Manufacturing 1021X4 surface mtd. fluorescent (2) tub 3 64 192 £acility Manufacturing 102 6" recessed fluorescent £ixture 36W 1 36 36 facility Notes: 1. Proposed Wattage for each Building Area type shall not exceed the Allowed Wattage for that Building Type. Trading wattage between Building Area types is not allowed under the Building Area Method compliance path. 2. Proposed fixtures must be listed in the building area in which they occur. Include ALL fixtures. 3. For proposed Fixture Description, indicate fixture type, lamp type (e.g. T-8), number of lamps in the fixture, and ballast type j� included). For track lighting, list the length of the track (in feet) in addition to the fixture, lamp, and ballast information. 4. For proposed Watts/Fixture, use manufacturer's listed maximum input wattage of the fixture (not simply the lamp wattage) and other criteria as specified in Section C405.5.1. For line voltage track lighting, list the greater of actual luminaire wattage or length of track multiplied by 50, or as applicable, the wattage of current limiting devices or of the transformer. For low voltage track lighting list the hr'nefnrmcr rotcr! inin+}anc