Laserfiche WebLink
I <br /> POLICE HQ—MASONRY CLEANING AND REPAIR APRIL 15,2016 <br /> b) Any permanent signs located in the construction area that are <br /> temporarily relocated,damaged or destroyed by the Contractor <br /> or a third party prior to the Physical Completion Date <br /> 2) When all or some of the necessary signs or traffic control devices <br /> are to be furnished by the Owner, it will be so specified in the <br /> Contract. <br /> 3) The Contractor shall: <br /> a) Provide the posts or supports <br /> b) Erect and maintain the signs in a clean,neat, and presentable <br /> condition until the Owner approves their removal <br /> c) Take these signs,posts,or supports down when the need for <br /> these signs has ceased. All posts and supports shall be <br /> removed from the Project and shall remain the property of the <br /> Contractor <br /> d) Remove all non-applicable signs,or completely cover with <br /> metal or plywood,during periods when they are not needed. <br /> 4) All control signs necessary for nighttime traffic control shall be <br /> fully reflectorized. <br /> 5) Existing traffic control and Street name signs that interfere with <br /> construction shall be relocated or removed by the Contractor and <br /> temporarily stored in a safe place. All "STOP", "YIELD", and <br /> ' "ONE-WAY" signs shall be removed or relocated only upon <br /> approval of the Owner. Existing signs shall not be removed until <br /> the Contractor has provided temporary measures sufficient to <br /> safeguard and direct traffic after the existing signs have been <br /> removed. Preservation and maintenance of traffic control and street <br /> name signs shall be the sole responsibility of the Contractor. <br /> 6) As Work progresses and as conditions permit,temporarily relocated <br /> or removed traffic and Street name signs shall be reset in their <br /> permanent location by the Contractor(see700 series applicable <br /> Standard Plans regarding sign and post installation). Signs and <br /> other traffic control devices damaged or lost by the Contractor shall <br /> be replaced or repaired by the Contractor at no additional cost to the <br /> Owner. The option whether a sign can be repaired or shall be <br /> replaced shall be the Owner's,and such decision shall be final and <br /> binding on the Contractor. <br /> 7) Traffic control signs,other than parking prohibition signs,which are <br /> required to be installed ahead of construction activities, shall be <br /> installed immediately before the construction activity begins. The <br /> Contractor may elect, as a matter of convenience in advance of the <br /> scheduled construction activity,to install and effectively cover the <br /> signs until the construction activity begins. <br /> 8) Construction signs shall be divided into two classes—Class A and <br /> Class B. In case of disputes,the Owner will determine if a <br /> construction sign is considered as a Class A or B construction sign. <br /> 9) When Class A or B construction signs are required,the work to <br /> provide these signs shall be: <br /> a) Furnishing,removing,and disposing of the posts or supports <br /> for the signs. <br /> b) Initial acquisition from the Owner and ultimate return to the <br /> Owner of the required Owner-furnished signs <br /> VEHICULAR ACCESS AND PARKING 01 5500 - 11 <br /> I <br />