Faber Construction Corp 9/27/2016

I CITY OF EVERETT SPECIAL PROVISIONS Provide valves with hand wheels or operating nuts as designated. In general, valves buried on the distribution system shall be nonrising stem type, open counterclockwise, and be equipped with two 0 rings in the stuffing box with a two inch operating nut. Valves within vaults shall be rising stem type, open counterclockwise, and be equipped with two 0 rings stuffing box with a hand wheel for operation. 9-30.3(1) Gate Valves (3-inches to 16-inches) Delete 9-30.3(1) and substitute the following: 9-30.3(1) Gate Valves (2-inches to 12-inches) Provide Waterous Series 2500, or equal, resilient wedge gate valves meeting the requirements of AWWA C509 or AWWA C515. Provide an affidavit of compliance stating the valve furnished fully complies with AWWA C509 or AWWA C515. 9-30.3(3) Butterfly Valves Revise the first sentence of the second paragraph of 9-30.3(3) to read as follows: Valve operators shall be of the travelling nut, self-locking type, sealed, gasketed and permanently lubricated for underground service. 9-30.3(4) Valve Boxes Supplement 9-30.3(4) by adding the following: Plastic valve boxes with a cast iron lid having dimensions conforming to a number 940 valve box, as manufactured by Handley Industries or equal, are acceptable for valve boxes located in grass, non-paved or paved non-vehicular traffic areas. 9-30.3(6) Valve Stem Extension Revise the first paragraph of 9-30.3(6) to read as follows: Provide valve stem extension in accordance with COE Standard Drawing No. 504. 9-30.5 Hydrants Delete first paragraph of 9-30.5 and substitute the following: Provide fire hydrants with ANSI 125 flanged connection conforming to AWWA C502. Provide Mueller "Super Centurion No. 250', American Flow Control "Waterous Pacer No. WB67", East Jordon Iron Works "WaterMaster® 5CD250", or equal. 9-30.5(2) Hydrant Dimensions Delete last sentence of first paragraph of 9-30.5(2) and substitute the following: Provide hydrants having two 2-1/2 inch hose nozzles and one 4-1/2 inch pumper nozzle. The 4-1/2 inch pumper nozzle shall be National Thread and fitted with a 5-inch STORZ fitting. Delete last sentence of second paragraph of 9-30.5(2) and substitute the following: Paint hydrants with two coats of high gloss Caterpillar yellow, Luxite 6100-516, Rost-Oleum 7448, or equal. Paint the port caps with two coats of high gloss black enamel paint. 9-30.5(4) Hydrant Restraints Revise the first paragraph of 9-30.5(4) to read as follows: Provide either mechanical joint restraint system in accordance with 9-30.5(6) of these Special Provisions, or field lock gaskets for hydrant restraint. Water Main Replacement"Q" Division 9 -MATERIALS July 8, 2016 -Broadway WO No.—UP3612 SP-176111