Laserfiche WebLink
C. Lanes without curbs shall be identified by red traffic paint with a 6-inch wide <br /> stripe on the pavement, extending the length of the designated fire lane. <br /> d. The words 'NO PARKING-FIRE LANE'shall be in 3-inch stroke white letters <br /> 18 inches in height, and placed 8 inches measured perpendicular from the red <br /> paint stripe on the pavement. In most cases,both sides of the access road shall be <br /> marked. Where long drives are to be marked,the repetitions shall alternate sides <br /> of the drive. <br /> e. Marking shall also include the addition of metal signs stating'NO PARKING- <br /> FIRE LANE-TOW AWAY ZONE'to be installed at intervals or locations <br /> designated by the Fire Code Official. The signs shall be approximately 12 inches <br /> in width and 18 inches in height and have red letters on a white background. <br /> Metal signs shall be installed on either 2-inch metal pipes for private property or <br /> treated 4-inch by 4-inch wood posts for public property and shall be located so <br /> that the bottom of the sign is a minimum of 7 feet above the curb. Where fire <br /> lanes are adjacent to buildings or structures and when approved or directed by the <br /> Fire Code Official,the signs may be placed on the face of the building or <br /> structure. <br /> f. Where directed by the Fire Code Official, specific areas shall be designated and <br /> those areas are to be marked with diagonal striping across the width of the fire <br /> lane. Diagonal marking shall be used in conjunction with painted curbs and/or <br /> edge striping and shall run at an angle of 30 to 60 degrees from one side to the <br /> other. These diagonal lines shall be in red traffic paint,parallel with each other, at <br /> least 6 inches in width and 24 inches apart. Lettering shall appear as above. <br /> 5. Fire Lane Marking-Fire apparatus access roads shall be marked whenever necessary to <br /> maintain the unobstructed minimum required width of roadways. Fire lanes shall be <br /> marked as follows: <br /> a. Curbs shall be identified by red traffic paint with a 6-inch wide stripe on the top <br /> and front, extending the length of the designated fire lane. <br /> b. Rolled curbs shall be identified by red traffic paint with a 6-inch wide stripe on <br /> the curb, extending the length of the designated fire lane. <br /> C. Lanes without curbs shall be identified by red traffic paint with a 6-inch wide <br /> stripe on the pavement, extending the length of the designated fire lane. <br /> d. The words 'NO PARKING-FIRE LANE' shall be in 3-inch stroke white letters <br /> 18 inches in height, and placed 8 inches measured perpendicular from the red <br /> paint stripe on the pavement. In most cases,both sides of the access road shall be <br /> marked. Where long drives are to be marked,the repetitions shall alternate sides <br /> of the drive. <br /> e. Marking shall also include the addition of metal signs stating'NO PARKING- <br /> FIRE LANE-TOW AWAY ZONE'to be installed at intervals or locations <br /> designated by the Fire Code Official. The signs shall be approximately 12 inches <br /> in width and 18 inches in height and have red letters on a white background. <br /> Metal signs shall be installed on either 2-inch metal pipes for private property or <br /> treated 4-inch by 4-inch wood posts for public property and shall be located so <br /> that the bottom of the sign is a minimum of 7 feet above the curb. Where fire <br /> 20 �r <br />