Ordinance 3168-10 - Laserfiche WebLink

1. EROSION AND SEDIMENT CONTROL REQUIREMENT#11 REMOVAL OF TEMPORARY BMPs All temporary erosion and sediment control BMPs shall be removed within thirty (30) days after final site stabilization is achieved or after the temporary BMPs are no longer needed. Trapped sediment shall be removed or stabilized on site. Disturbed soil areas resulting from removal shall be permanently stabilized. m. EROSION AND SEDIMENT CONROL REQUIREMENT#12 DEWATERING CONSTRUCTION SITES Dewatering devices that don't achieve state water quality standards shall discharge into a sediment trap or sediment pond. n. EROSION AND SEDIMENT CONTROL REQUIREMENT#13 CONTROL OF POLLUTANTS OTHER THAN SEDIMENT ON CONSTRUCITON SITES All pollutants other than sediment that occur on-site during construction shall be handled and disposed of in a manner that does not cause contamination of stormwater. o. EROSION AND SEDIMENT CONTROL REQUIREMENT#14 MAINTENANCE All temporary and permanent erosion and sediment control BMPs shall be maintained and repaired as needed to assure continued performance of their intended function. All maintenance and repair shall be conducted in accordance with the City of Everett's Stormwater Management Manual and Design and Construction Standards and Specifications. All temporary erosion and sediment control BMPs shall be maintained in a satisfactory condition until such time that clearing and/or construction is completed, permanent drainage facilities are operation, and the operational, and the potential for erosion has passed. As construction progresses and seasonal conditions dictate, the erosion control facilities shall be maintained and/or altered as required by the City Engineer to ensure continuing erosion/sedimentation control. p. EROSION AND SEDIMENT CONTROL REQUIREMENT #15 FINANCIAL LIABILITY 17