9506 7TH AVE SE 2017-04-10 - Laserfiche WebLink

b. Classrooms that are accessory religious educational rooms should be classified should be A-3, per IBC section 303.1.4, and per the original permit. The occupant count can be based on educational use for square footage, but the occupancy type would remain assembly. c. All rooms used for assembly purposes should be shown on the drawings to have a posted maximum occupancy sign, per IBC section 1004.3. Eg ress 1. Room 117 should have egress and emergency lighting shown on the drawings, per IBC sections 1006.3, 1011.1, and Table 1015.1. 2. At minimum, doors in room 117 installed since the originai permit drawings should swing in the direction of egress, per IBC section 1008.1.2. Construction 1. Please indicate handrails on the new stairs accessing the stage, per IBC sections 1009.15 and 1012.1. 2. The new stage platform should be detailed on the construction drawings to show the framing and methods of support. The section through the floor construction and supporting structure should indicate one-hour construction. The specific materials and tested assembly number should be shown on the drawings, with tested assembly numbers referenced on the details and specific materials required for that tested assembly referenced on the details. 3. A section through the new one-hour rated ceilings is required for the basement and sanctuary ceiling. The specific materials and tested assembly number for the construction should be shown on the drawings. The details and notes currently shown for the new ceiling platform on the architectural and structural drawings are cross-referenced and incomplete. 4. Please indicate on the drawings the scope of new work and materials in the toilet rooms, on sheet A3.2. If the materials or fixtures shown in the elevations is either existing (untouched) or reinstalled, please mark it as such. 5. Compliance with the requirements for enclosed attic spaces should be shown on the drawings for the new sanctuary attic, per IBC section 1203.2. Energy 1. Please show lighting reduction controls on the drawings, per WSEC C405.2.1.2. 2. Please show additional lighting controls on the drawings, per WSEC C405.2.2. 6. The new attic in the church will require insulation, per WSEC C101.4.3, to meet the R-value shown in WSEC table C402.2. Mechanical-Deferred Submittal 1. The modified volume of the sanctuary and the basement meeting room should be shown to be in compliance with the outside air and mechanical ventilation requirements of IMC section 403.