3414 WETMORE AVE 2017-01-13 - Laserfiche WebLink

• Electronics and operational controls fully enclosed in a lockable cabinet capable of housing up to 12 AH batter- ies. • Optional LED-10 Series Remote Annunciators operate off serial two-wire EIA-485 interface. • Optional contact-by-zone module and printer interface for on- or off-line printing. • 230 VAC, 50 Hz international version available. REMOTE SITE UPLOAD/DOWNLOAD The MS-5210UD may be downloaded or uploaded (requires panel software revision #MS52103.0 or greater) without compromising the system fire protection at the protected premises. • Download system programming. • Upload key system information: ✓ Current system status, history + walk test files. ✓Zone, AC line, NAC1, 2, 3 and 4, resettable power and battery voltages. ✓ System programming. • Upload or download within one minute without affecting normal fire panel functions. • Multiple security techniques. • Requires PK-5210UD programming kit, which works with most Hayes-compatible modems (consult factory for list- ing). SPECIFICATIONS Single PC board design using Surface Mount Technology (SMT). Two modular telephone jacks for connection to RJ31 X/Modules. AC Power • 120 VAC, 50/60 Hz, 2.3 amps. • 230 VAC, 50 Hz, 1.2 amps ("E" suffix). • Wire size: minimum 14 AWG with 600-volt insulation. • Built-in brownout circuitry. • Built-in voltmeter. Communicator • One line-active indicator for each of two phone lines. • "Kiss-Off' signal LED. • Dual "low telephone voltage detect" circuitry. • Programmable event codes per each format. • Up to 100 transmitted events/messages. • Selectable/deselectable transmissions of 100 events. Communication Formats Express and Ademco Contact ID formats allow complete transaction to be communicated in under five seconds. • Ademco Contact ID. • 20 PPS, 3+1 standard and expanded. • 20 PPS, 4+1 standard and expanded. • 20 PPS, 4+2 standard and expanded. - 4+1 and 4+2 Ademco Express. INITIATING DEVICE CIRCUITS (ZONES) The MS-5210UD includes ten programmable Class B Initi- ating Device Circuits (zones). Use the CAC-10F Class A converter module to convert all Class B IDCs/NACs to Class A. Each zone may support two-wire smoke detectors. Pro- gramming options include: • Normally Open Contact devices (pull, heat). • Four-wire smoke detectors. Page 2 of 3— DF-51492 • 07/12/04 • Waterflow (silenceable/non-silenceable) operation. • Supervisory (standard/auto-reset) operation. • Remote switch for Reset, Drill, Silence, Acknowledge. • Critical and Noncritical Process Monitoring (standard/ auto-reset). All circuits are power-limited and fully supervised. They allow up to 100 ohms of line resistance and allow for use of 12 to 18 AWG wire. NOTIFICATION APPLIANCE CIRCUITS Two Style Y(Class B) @ 3.0 amps each. Use the CAC- 10F Class A Converter Module to convert all Class B NACs and IDCs to Class A. Option module adds two Style Z(Class A) NACs @ 1.5 amps each. All circuits are fully power-limited and meet the new UL power-limiting requirements effective May 1, 1995, using fuseless technology. AUXILIARY OUTPUTS • Resettable four-wire smoke detector power @ 500 mA. • Non-resettable power @ 500 mA. • Two fully programmable Form-A!B relays. • Option module adds two fully programmable Form-C relays. COMPATIBLE DEVICES, EIA-485 PORT LED-701M: EIA-485 Interface Module. Provides MS- 5210UD with EIA-485 output, capable of supporting up to 32 compatible EIA-485 devices (listed below). LED-10 Series: LED-type fire annunciators capable of displaying Alarm (red) and Trouble (yellow) LEDs for all ten Initiating Device Circuits (IDCs). NOTE: For Canadian Supervisory Service, use LED-10LS2 only. AFM-16AF: LED-type fire annunciator capable of pro- viding up to 16 zones ofAlarm (red) annunciation and com- mon system trouble LED. Mounts to 4-gang electrical box ONLY. LDM Series: Lamp Driver Module series for use with custom graphic annunciators. ACM-8RF: Remote Form-C relay module. Provides eight mappable Form-C relays driven by EIA-485 for contact-by- zone capability (two minimum required for contact-by-zone). Each requires ABS-8RF for mounting. NOTE: For more detailed information on Compatible EIA-485 Devices for use with the MS-5210UD, please refer to the LED-10, AFM/AFM-X, LDM or ACM-8RF data sheets, document numbers DF-51500, DF-51465, DF-51384, and DF-51555 respectively. CABINET SPECIFICATIONS The cabinet is red with a dark blue overlay. Knockouts on the top, sides, and back provide ease of wire entry. The cabinet can be surface or semi-flush mounted and is com- pact in design. Dimensions: Door: 17.11" high x 14.71" wide (43.46 cm high x 37.36 cm wide). Backbox: 16.90" high x 14.50" wide x 4.50" deep (42.93 cm high x 36.83 cm wide x 11.43 cm deep). Trim Ring: Part # TR-4-R, 20.020" high x 17.620" wide (50.85 cm high x 44.75 cm wide).