Resolution 5755 - Laserfiche WebLink

determine if Council wishes to approve the requested modification. Major modifications include, but are not limited to, significant changes to elevation drawings, roof pitch, appearance of exterior details and implied materials, removal of under-structure parking (parking stall count will be based on parking requirements), reduction of environmental protection and storm water abatement facilities below the minimum required by Code and change to or reduction of other architectural details not mentioned here but depicted in the attachments. Modifications the City deems "minor" may be submitted to the Planning Director for consideration and administrative approval. A change in building step-back and/or roof design (but not pitch), reduction in the depth of balconies and splitting the required open space between the front and rear of the building (1,100 square foot total required) would be considered a minor modification. 2.3. Design Standards—Determination. The Historic Overlay zone standards shall not apply. The building on the RAL property shall be built substantially as shown in Exhibits "B" as determined by the Planning Director. Building height shall not exceed 60 feet above the highest elevation of the sidewalk on the abutting Rockefeller Avenue frontage. The north side elevation of the building shall be symmetrical with the south side elevation as shown in Exhibit B, Page 2. The remaining properties in the block shall be governed by the City's Multiple Family Design Guidelines adopted by City Council Resolution No. 4618, or as in the future may be amended, and Multiple Family Development Standards of EMC 19.15, as amended. 2.4 Building Materials. The building shall include the following as building materials: Siding—horizontal lap siding composed of painted wood or cementitious product (such as hardi-plank lap siding). No vinyl siding or sheet products such as T-111