206 E CASINO RD GLOBAL SMOKE SHOP 2017-01-24

Egress 1. Maximum exit access travel distance is 75 feet, per IBC Table 1021.2(2). Common path of travel will require that an exit is available within 75 feet of any portion of the building accessed by a single tenant, current or future. a. Based on the new tenant configuration, a second exit will be required from the shared tenant corridor. 2. The exit and exit access discharge should be shown on the drawings discharge to the public way, per IBC sections and tables 1015.1, 1021.2. 1027.1, and 1027.6. 3. Required exits should be separated by one half of the maximum overall diagonal dimension of the floor area served, per IBC section 1015.2.1. 4. Doors should swing in the direction of egress, per IBC section 1008.,1.2. 5. Hardware should be shown on the drawings for all new doors and all required exit doors (preferably in a door schedule). Egress doors should be readily openable from the egress side, without the use of a key or special knowledge or effort. Door hardware should be shown on the drawings to be graspable. A sign should be posted by the main exterior doors required for egress that the door is to remain unlocked when the building is occupied. IBC section 1008.1.9 6. Emergency lighting should be shown on the drawings, per IBC section 1006.1. 7. Illuminated exit signs should be shown on the drawings, per IBC section 1011.1. Construction 1. The fixtures and equipment in the toilet rooms and kitchens should be shown on the drawings. 2. All walls and doors should be indicated as new on the drawings, unless previously permitted, inspected, and approved (finaled). a. Wall construction should be detailed on the drawings to resist a minimum 5 psf horizontal load. 3. New ceilings should be shown on the drawings to comply with the seismic installation details of NW Ceiling Institute. Accessibility 1. The route to the primary function areas should be accessible, per IBC section 3411.7. Additional Comments 1. Mechanical, plumbing and electrical permits can be applied for and obtained after the building permit is issued. These comments address building issues only. Revisions or additions may be required by other departments (Utilities, Public Works, Traffic, or Planning). Upon resubmission of the drawings, plan review will resume and your application will be given priority. All required submittals must be of sufficient detail and information to ensure that the proposed structure will be constructed in compliance with all adopted codes. Code references cited include the 2012 International Building Code (IBC), 2012 International Fire Code (IFC), and the 2012 International Property Maintenance Code (IPMC). The current IBC referenced standard for accessible design is the 2009 "Accessible and Usable Buildings and Facilities" (ICC/ANSI A117.1). Federal ADA regulations and standards may be more restrictive. All codes referenced, as adopted by the City of Everett, must include current revisions by the State of Washington.