930 N BROADWAY 2018-01-01 MF Import

6. Safety glazing should be'.dentified on door elevations C, D, E, and H shown on sheet A602, per I6C sectiun 2406.4 (1). 7. Safety glazing at stair guards should be identified on the drawings shown on sheet A41Z, per IBC section 2406.4 (8). 8. Safety glazing at stairs landir.gs less +han 18 inches from the plane of glass as shown on sheet A411, per IBC section 2406.4 (11) exception 2. 9. Safety glazing snould be should be identified on the elevations of storefront windows and doors, per IBC sectior� 2406. 10.5afety glazing, dcgree of slope, monolithic or multiple layer glazirig system, screening, framing, dimensions of glazing members, and otner information required by IBC section 2405 should be shown on the drawing for all sloped ylazing and skylight systems. 11.The minimum base height of 4 inches should be shown on the drawings for all toilet room walls to comply with IBC section 121U.2. 12.Drinking fountains should be shown on the drawings t� comply with IBC seclions 2904.4 and 1109.5. Egress 1. The accessible means o( egress for the building should be noted on the drawings, per IBC sectio�� 1007.1. 2. The elevator cab interior clear dimensions should be sh�own on tne drawings such that the elevator car shall be of such a size and arrangement to accommodate a 24-inch by 84-inch (610 mm by 1930 mm) ambulance stretcher in the horizontal, open position and shall be identified by tne international symbol for emergency medical services (star of life). The symbol shall not be less than 3 inches (76 mm) high and shall be placed inside on buth sides of the hoistway door frame, per EMC chapter 16.01, section V. 3. Landing depth and width should be dimensioned for all stairs on the drawings, per IBC section 1009.5. 4. ;Nhere dours swing into the stairwell landing, the arc of the door swing oi� the minimum landing dimensions should be shown on the drawings not to reduce the required ianding to less ttian one-half of the required width, pPr IBC section 1009.5. 5. Minimum tread dimension of 11 inches and maximum riser dimension of 7 inches should be shown fcr all stairs on the dra�vings, per IBC scction 1009.4.Z. '�')