930 N BROADWAY 2018-01-01 MF Import

6. How is accessibility provided wiCh regards to the accessible route from designated accessible parking areas, seating, counters, point of sale service counters, controls and operating mechanisms, sinks, and kitchens per IBC sections 1109.10, 1109.11.3, 1109.12, 1109.3, and 1109.4 ? Occupancy 1. Occupancy type, occupancy load calculations, and square footage areas should be shown to support the occupancy load information shown on sheet G002, sumnarized per floor. The occupancy load on the basement floor should be included. 2. Please clarify the selection of non-separated uses by ider�tifying that code section on the code analysis sheet G002, per IBC section 508.3. 3. Please identify any incidental accessory occupancies r�nd the requirements for those occupancies on the code analysis sheet G002, per IBC section and table 508.2.5. The rooms used to collect waste and linen that are over 100 squarE feet should include details of construction capable of resistiny the passage of smoke, per IBC section 508.2.5.2. 4. All assembly occupancies identified in IBC section 303, or defined by the function of the space per If3C table 1004.1.1, should have the occupant load of the room or space posted near the main exit or exit access doorway, and shown on the drawings, per IBC sectior 1004.3. Construction � 1. Shaft enclosures of four stories or more should be shown on the drawings as two hour fire-resistance rated construction, since the basement is considered a story, per IBC section 708.4. 2. The skylight areas over the atrium should be shown on the third floor reflected ceiling plan, since they are less than 55 feet above the Floor and will require sprinklers, per IBC section 404.3. 3. Partition types 22, 24, 25 and 30 should reference a UL assembly that has two studs with a space in between. 4. The opening area around stair 3 should be dimensioned, per IBC section 708.2.2 exception 2.1. 5. The suspended ceiling details should be shown on the drawings per attached Northwest Technical ?nstitut� bulletin, to include stabilization for seismic requirements and the two inch angle requirements at edge of ceiling.