930 N BROADWAY 2018-01-01 MF Import

19.The urinal height should be dimensioned on the drawings as 17 inches maximum above the floor, per ICC/ANSI A117.1-2003 section 605.2. 20.The accessible water closet height should be dimensioned on the drawinys as between 17 and 19 inches maximum above the floor, per ICC/ANSI A117.1-2G03 section 604.4. 21.Door hardware should be identified on thc door schedule and should not require tight grasping, tight pinching, or twisting, per IBC sedion 1008.1.9.1. 22.Pull and push side dimensional maneuvei ing dearances at manual swinging doors should be shown on the dra�vings, per ICC/ANSI A117.1-2003 figure 404.2.3.1 as required by IBC section 1103. a. Doors 140A, 165A, 183A on sheet A404 do not appear to have 18 inches clear on the pull side, per ICC/ANSI A117.1-2CO3 Figure 404.2.3.1 (a) to egress from the space. b. Several patient exam rooms do not appear to have the 60 inch maneuvering clearance required, per ICC/ANSI A117.1-2003 Figure 404.2.3.1 (a) to egress from the space. 23.Accessibility details should be shown at seating, bars, counters, and points of sale, per ICC/ANSI A117.1-2403 chapter 9. Energy 1. The minimum requirements to comply with Washington State Energ;� Code 2009 should be shovan on the drawings, to include the R-value of insulation at the roof, walls and heated floors, windows and doors, lighting. Ali supporting worl<sheets and calculations should be submitted for review. These comments address building issues only. Revisions or additions may be required by other departments (Utilities, Public Works, or Planning). Code references cited include the 2009 Intemational 8uilding Code (I8C), the 2006 Washington State Energy Code (WSEC), and the 2003 Accessible and Usable Ciuildings and Facilities A117.1 (ICC/ANSI). All codes referenced, as adopted by the City of Everett, should indude cunent revisions by the State of Washington.