930 N BROADWAY 2018-01-01 MF Import

Meg Haiey July 18, 2011 Page 9 of 10 14. The tuming space wilhin the toilet rooms should be dimensioned, per ICC/ANSI A117.1-2003 section 603.2.1. Response: A 5 foot diameter dashed circle representing the required tuming space in accessible restrooms is shown on the floor plans as well as the enlarged plans on sheets A401 and A404. 15. On plan detail 1/A401, the centerline o'the women's room accessible water closet shouid be dimensioned as b�tween 16 and 18 inches from the side wall, per ICCIANSI A117.1-2003 section 604.2. "I'he location of all water Gosets in the clinic shoutd be dimensioned on Ihe drawings. Response: The centerline of all toilets in accessible sWils and toilet rooms are dimensioned as 1'-6" from their adjacent walls. See sheeis A401 and A404. 16. The vertical grab bar should be shown in elevation in the accessible water cioset compartment, per ICCIANSI A117.1-2003 section 604.5. All grab bar dimensions l,vertical and horizontal) should be shown on the drawings to compiy with per ICC/ANSI A117.1-2003 figure 604.5.1. Response: Grab ba� locations are shown in the Typicai Mounting Heights elevation drawing on 21/A427. 17. The toilet paper dispenser in the accessible water closet compartment should be shown on lhe drawings to comply with ICC/ANSI A117.1-2003 sedion 60A.7. Response: Toilet paper dispensers are shown in plan on sheets A401 and A404 and elevated as to the requfred height above finish floor on 21/A427. 18. The lavatory heighl should be dimensianed on the drawings as 34 inches maximum above the floor, per ICC/ANSI A117.1-2003 section 606.3 in toilet rooms, ciassrooms, labs, and break rooms, per IBC 1109.2.3. Response: Lavatory heights are shown in the Typical Mounting Heights elevation drawing on 211A427. 19. The urinal heighl should be dimensioned on the drawings as 17 inches maximum above the fioor, per ICC/ANSI r�117.1-2003 section 6052. Response: Urinal heights are shown in the Typicai Mounting Heights elevation drewing on 211A427. 20. The accessible wa:er cioset height should be dimensioned on tho drawings as between 17 and 19 inches maximum above the Floor, pe; ICCIANSI A117.1-2003 section 604.4. Response: Wator closet heights are shovm in the Typical Mounting Heights elevation drawing on 21/A427. 21. Door hardware should be identified on the door schedule and should not require tight grasping, tight pinching, or twis:ing, per IBC section 1008.1.9.1. Response: All door hardware specified for this project in is complianco with 1008.1.9.1. See attached specifications.