1130 RAINIER AVE A 2018-01-01 MF Import

the code section, per IBC section 1107.6.2.1. If a higher level of compliance is selected by the arciiitect, it will be reviewed for compliance with adopted state laws for compliance with that selection. Federa! ADA regulations and standards ma}� be more restrictive. The Americans with Disabilities Act is enforced by the Department of Justice. 2. The accessibie route should be shown in its entirety on the arciiitectural site plan drawings, with details referenced to the plans, for the pedestrian and vehicular access site points to the accessible building entrances served, per IBC section 1104.1. a) The dimensions of the van accessible parking stall and access aisle should be shown on the drawings. Please clarify on the drawing that the overall dimension of the parking area is 16'-0" or greater, and that the dimensions of the van accessible parking space(s), car accessible space (s), and access aisle meet the minimum requirements, per IBC section 3411.h.Z (4). b) The location of the van accessible signage should be shown on the drawings, per IBC section 3411.4.2 (3). c) The calculations for the number of required accessible parking spaces should be shown on the drawings, per I8C section 1106.1. d) Ramps should be shown with level landings, at the top and bottom of stanndard ramps, per ICC A117.1-2003 section 405.7, or at curb ramps per ICC A117.1-2003 section 406. e) Ramp landings should be dimensioned on the drawings to meet the minimum width requirements for turns and door entrances, per ICC A117.i-2003 section 405.7, when they are part of lhe accessible route, per IBC section 1104.2. � Within tFie property line, ramp, sidewalk, and stair widths should be shown on the drawing to be a minimum of 49 inches, per IBC section 1101.2.2, when they are part of the accessibie route, per IBC section 1104.2. �) ,�'�thin the property line, ramp and stainvay handrail extensions should be shown on the drawings for the accessible rouCe, per IBC section 1012.6, when they are part of the accessible route, per IBC section 1104.2. 3. Please prcvide a section through the threshold connecting the Building B lobby with the exterior landing. A Floor or landing should be shown at the same elevation on either side of the door, per IBC section 1008.1.5, not to exceed the threshuld requirements of ?CC A117.1-2003 sections 303.2 and 303.3. 4. lease indicate on the drawings whether the Type B unit toilet rooms comply with Option A or Option B, per ICC A117.1-''003 section 1004.11.3. Deferred Permits Requiring Drawings 1. Mechanical, sign, and suppression permiks shei�ld be submitted as separate permit applications. Applicable codes inc:� de fY�e 2009 International Building Code (IBC), the 2009 Internationai Fire Code (IFC), the 20J9 International Mechanical Codc (IP1C), the 2009 VVashington State Energy � �