1130 RAINIER AVE A 2018-01-01 MF Import

2. Previous comment: The accessible route should be shown in its entirery on thc architectural site plan Jrawings, with details referenced to the plans, for the pedestrian and vehicular access site points to the accessible building entrances served, per IBC section 1104.1. a. Details should be referenced on the new architectural site plan, sheet A1.0. a) The location of the van accessible signage should be shown on the drawings, per IBC section 3411.4.2 (3). a. Signage shoivn on sheet AI.O is not the corred h,eight fo� a van accessible parking space, perA117.1-2003 section 502.7. b) Ramps should be shown with level landings, at the top and bottom of stanriard ramps, per ICC A117.1-2003 section 405.7, or at curb remps per ICC A117.1-2003 section 406. a. The detail for the ramp on Sheet A1.0 �efers to the plan for length, but the site plan does not indicate the length ramps, to indude curb ramps. c) Ramp landings should be dimensioned on the drewings to meet the minimum width requirements for tums, per ICC A117.1-2003 section 405.7, when they are part of the accessible route, per IBC section 1104.2, or the accessible means of eg�ess, per IBC section 1007.2. a. Dimrnsions not sho�vn on plans. d) Within thc propercy line, remp, sidewalk, and stair widths should be shown on the drawing to be a minimum of 44 inches, per IBC section 1101.2.2, when they are part of the accessible route, per 18C section 1104.2. a. Dimensrons not shown on plans. e) Within the property line, ramp and stainvay handrail extensions should be shown on the drawings for the accessible route, per IBC section 1012.6, when they are part of the accessible route, per IBC section 1104.2. a. An aaessib/e route is desrgnated to Burlding A with a 4.8°o ramp and 8.6" rise wifhout handreils, per ICC A117.1-2003 section 905.8. b. Edge protection should be shoivn on the drewings per ICC A117.1-?003 section 905.9. 3. P�ev_ious comment.• Please provide a section through the threshold connecling the euilding B lobby with the exterior landi�g. A floor or landin9 should be shown at tfie same elevation on either side of the door, per I[3C section 1008.1.5, not to exceed the threshold requirements of ICC A117.1-2003 sections 303.2 and 303.3. a. At minimum, [he plans for Type A, Type 8 units and the communiry room slrou/d �eference detail 1Z/A8.2 at the doo� entry, typical. �}. The gate at chain link fences should have a smooth surface (within 10 inches of the grede, measured vertically) on the push side of the gate, extending the full vaidth of the gate, shown on the drawings, per [CC A117.1-?_003 section 404.2.9. Deferred Permits Requiring Drawings 1. Nlechanical, sign, and suppression permits should be submitted as separate permit applications. %//