1313 PACIFIC AVE 2016-01-01 MF Import

• - � � f. The centerline of the lavatory should be dimensioned on the drawings, such that the clear floor space per ICC/ANSI A117.1-2003 section 305.3 is met, per ICC/ANSI A117.1-2003 section 606.2. 3. Employee work areas should be shown on the drawings such that an individual with disabilities can approach, enter and exit the work area, per IBC sedion 1103.2.3. a. Door hardware should be identified on the door schedule for al! new doors, and should not require tight grasping, tight pinching, or twisting, per IBC sedion 1008.1.9.1. 4. Closers should also be identifled on the door schedule. 12 inch m(nimum clearance on the push side is required adjacent to the latch when there is also a closer, which applies to doors 30 and 17, per ICC/ANSI A117.1-2003 figure 404.2.3.1 (b). 5. If vision tltes are provided, the location of the vision Iites should be shown on the drawings to comply with A117.1-2003 section 404.2.10. Mechanical 1. A separate mechanical permit is required for new mechanical equlpment and the dfstributfon of air, heat or cool(ng. Upon resubmission of the drawings, your application will be g(ven prfoMty and plan review w(II resume. All required submittals must be of sufticient detail and (nformation to ensure that the proposed structure will be constructed in compliance with all adopted codes. These comments address building issues only. Revisions or additions may be required by other departments (Utiiities, Public Works, or Planning). Code references cited include the 2009 Intemational Building Code (IBC), ?009 Intemational Fire Code (IFC), the 2Q09 Intemational Mechanical Code (IMC), the Uniform Plumbing Code (UPC), the 2009 Washington State Energy Code (WSEC), and the ICC/ANSI A117.1-2003 Accessible and Usable Buildings and Facilities. Ail codes referenced, as adopted by the City of Everett, should indude current revisions by the State of Washington. Please contact me with any questions at 425-257-8813. incerely, Meg Hal Ptans Exa ine 2 a,�.