Laserfiche WebLink
3. A camplete section showing all conswction segments of the ASW including the wall <br /> to foundation, wall to floor, and wall to attic conditions should be provided on the <br /> plans. <br /> 4. As wood fiaming has been chosen for the sucrounding structure, differential <br /> settlement caused by the disparity ben+'een the shrinkage of the wood, and non- <br /> shrinkage of other materials within the ASW(if utiliud) should be detailed. <br /> 5. Every door penetradng an area separadon wall should be shown in plan and cross- <br /> referenced to the door and :�azdwaze schedules to be a three-hour rated automatic- <br /> closing fire assembly. Section 504.6.2 <br /> 6. 'fhe requirements of automadc-closing fire assemblies should be stated on the plans <br /> and tied-into the Hardwaze Schedule per Sections 713.2 and 713.6.1 <br /> 7. The area separadon wall should extend through the concealed roof space to the outer <br /> edges of the projected overhang. This should be detailed on the plans. Secdon <br /> 504.63 <br /> 8. A detail should be provided which shows that the area sepazadon wall terminates 30 <br /> inches above the roof or extends to the bottom of tt�e underside of the roof sheathing <br /> for a roof provided with a minimum of two-hour fire-resistive consttuction. Secdon <br /> 504.6.4 <br /> 9. If a pazapet is used, details should be provided in accordance with Section 504.6.5 <br /> 10.The minimum thickness of insulating material (concnete cover) should be verified for <br /> four-hour fia-resistance for all suppocting slabs, columns and walls supporting the <br /> ASW within the Type 1 building. Table 7-A <br /> Occupancy <br /> 1. The minimum thickness of insulating material (concrete cover) should be verified for <br /> tl�e three-hour occupancy separation for all suppo�ting slabs, columns and walls <br /> supporting the occupa��cy sepazation. Note that portions, if not all, of the eastem and <br /> wesicrn exterior walls support this occupancy separation. <br /> 2. The one-hour occupancy sepazation between the gazage and recreadon room should <br /> be defined on the plans. Table 3•B <br /> 3. If the one-hour occupancy separation between the gazage and recneadon room is to <br /> include the entry lobby, than Door .02 within room 102 should be shown as a one- <br /> hour fire-assembly, otherwise, Door.01 in Recreation Ra+m 15 should be shown as a <br /> one-hour fire-assembly. Sectiun 3023 <br /> 7 <br />