Laserfiche WebLink
Thoroughly vacuum all carpeted areas. Portable objects (chairs, <br /> wastebaskets, etc.) are to be moved to provide for vacuuming. <br /> Upholstered furniture is to be debris and lint free. <br /> 2.3 Weekly Routine Spot Clean Carpet <br /> All carpet is to be kept in a stain-free condition. <br /> 2.4 Weekly Vacuum with Edging Tool—All Corners <br /> All carpet edges and corners where floors and walls intersect, where floor <br /> and thresholds meet or around the bases of any object permanently placed <br /> on a carpeted surface shall be vacuumed with an edging. <br /> FLOOR CARE <br /> 2.5 Bi-annual Shampoo Carpet <br /> All carpet shall be surface cleaned with an appropriate solution designed <br /> to work with each type of carpet. Care is to be taken so as not to over- <br /> saturate the carpet. Extraction of these areas will be performed as <br /> necessary. <br /> 2.6 Emergency Spot Cleaning <br /> Contractors shall respond ASAP for any spill which threatens the aesthetic <br /> integrity of the carpet and upholstery as necessary. <br /> 2.7 Daily Sweep/Dust/Mop Floors <br /> All tile, resilient,wood and concrete floors shall be swept with a broom or <br /> dry mopped so as to leave floor in dirt and dust free condition. <br /> 2.8 Daily Wet Mop Floors <br /> All tile,resilient,wood and concrete floor surfaces shall be mopped, <br /> cleaned and disinfected. Scuff marks or stains are to be removed. <br /> 2.9 Bi-Annual Machine Scrub Floors <br /> Tile, wood and resilient floors are to be machine scrubbed with an <br /> appropriate pad. Grout shall be cleaned so as to produce a clean, dirt free <br /> appearance. <br /> 2.10 Annual Re-Wax/Buff Tile and Resilient Floors <br /> All tile and resilient floor surfaces shall be top cleaned with an effective <br /> detergent cleaner, neutralized and new wax applied. Floor is then buffed <br /> and/or burnished. <br /> 2.11 Annually Strip, Seal, Wax and Buff Tile and Resilient Floors <br /> All tile and resilient floor surfaces are to be stripped with a liquid stripper <br /> and aggressive pad so as to remove all wax and sealer. The floor then <br /> y ry shall be re-sealed with one coat of sealer followed by three coats of wax. <br /> i r ' All sealer and wax must be pre-approved as to manufacturer and type, by <br /> 2 <br />