9906 25TH DR SE 2016-01-01 MF Import

� PUBLIC WORKS PERMIT COMMENTS , 4. Contact the Public Works Inspector(call ) to discuss the project prior to beginning work. 4. Connect side sewer per City Standard#601. 5. Connect side sewer per City Standard#'s 601, 602, 604. 6. Connect all rooftop downspouts to the side sewer. � Connect rooftop downspouts to the dr:inage system provided for this lot. 8. Rooftop runoff must be discharged to a roof dovmspout infiltration system per City of Everett Storm Manual 3-2.6.2. The approximate size trench is 3.5'wide, 2' deep and 25' long. See attachment for more details. 9. The contractor must meet with the Public Works Inspector to discuss potential drainage routing prior to beginning the project. 10. Install erosion control measures as determined by the Public Works inspector, such as silt fence, straw bales, swaies, or erosion blankets. 11. install erosion control measures per City of Everett Standards for small parcels 12. Remove erosion control measures upon completion of the project prior to final approval of the permit. 13. AII excavated material from foundation, sidewalk and driveways shall be hauled to an approved, permitted site. No wasting of material is aliowed on this buiiding lot. 14. Nc dirt, mud, rocks or debris to be tracked onto roadway. 15 No building materials to be stacked on sidewalk/roadway and sidewalklroadway to be kept clean and open for pedestrian travel. 16. Adjust water meter box 1"above sidewalk grade. 17. Remove and replace curb, gutter and sidewalk as per City of Everett Standard Plan#'s 305A 8 I 306 on this proposal's frontage as directed by the Public Worhs Inspector (i.e. all unused driveways and any broken or damaged area must be replaced). 18. Install a Type I concrete driveway per City of Everett Standard#307. 1 g. Pave driveway from the front property line out to the street paving. I 20. Contact the VVater Disirict for connecting prcvisions for this building's water and sewer services. � 21. A catch basin as per City Standard Plan#402 with a gas trap per Standard Plan#410 is required ;� forthe parking area. i 22. If a sewer pump system is to be installed, the pressure line must discharge into a private manhole, then gravity flow across the public right-of-way.