9900 19TH AVE SE 2018-01-02 MF Import

2. The high piled combustible stock should be identified and classified by category and shown on the plans per Table 81-A, UFC. All requirements for smoke venting, curtain boards, smoke alarms, rack design and construction etc. should be indicated and detailed on the plans per UFC Article 81 and UBC Chapter 22, Division VI. Note that if any items are to be submitted under a separate permit, they should be listed as deferred submittals on the cover sheet. Section 106.3.4.2 3. Based on an occupant load of 200, four female -use water closets, and a total of three drinking fountains are required on -site. Table 29-A, Washington State Amendments Construction The one-way glass in office 204 should be specified to be safety glass per Section 2406.4, item 8, or a guardrail should be provided per Section 509 where the stairwa'., passes the glazing. 2. The shaft in detail 2/A-5.2 should be specified to have the gypsum wallbo-al on both sides of the metal studs. Table 7-B 3. It should be specified that the roof insulation, including vapor barrier shall have a maximum flame spread rating of 25 and a smoke density not to exceed 450. Section 707.3 Exiting An exit sign should be shown at Door #116. Section 1013.1 Accessibility 1995'Washington State 9Qeguhuions for Barrier -Free Design 1. The ADA parking sign on Detail 15/SD-2 should be shown as 3'-5' high centered at the head of the space and bearing the words, "State Disabled Parking Permit Required." Section 1107.3 2. Stairway treads (Detail 3/A-9.1) should have rounded non -slip nosings shown which project less than 1-1/2". Energy. 1995 Washington State Non -Residential Energy Code The plan notes should indicate the chosen energy code compliance option for the building envelope, as well as calculations or documentation provided. Section 1141.2