11033 7TH AVE SE 2018-01-02 MF Import

2. A Knox Box is required. 3. Premise Identification - Premises shall be clearly identified by the correct address at the street entry. Buildings shall be clearly identified so as to be visible and legible from the access road. Individual apartments and suites, where applicable, shall be clearly and legibly identified from the access road. 4. PREMISE IDENTIFICATION AND ALL REQUIRED FIRE DEPARTMENT ACCESS ROADS AND FIRE HYDRANTS SHALL BE IN SERVICE PRIOR TO COMMENCEMENT OF CONSTRUCTION. 5. A fire hydrant is required within 200 driving feet, but not closer than 50 feet, of every structure. Location of the hydrant(s) shall be approved by the Fire Marshal. 6. Based upon 5,550 square feet of Type V-B, non-sprinklered construction, the fire flow requirement is 2,000 gpm. 7. Portable Fire Protection - A portable fire extinguisher with a minimum U.L. rating of 2-A:10-B:C shall be provided within 75 feet of travel on all floors of each building during construction and prior to occupancy. 8. Fire Alarm System - An approved automatic fire detection system shall be provided as required by City Ordinance No. 1902-92, Chapter 16.76, of the Everett Municipal Code. Plans for such system shall be submitted to the Fire Marshal for review and approval prior to installation. Submittal shall include cut sheets of all equipment intended for use. Appropriate trip tests, witnessed by a Fire Department inspector, shall be performed, along with a certificate of completion, prior to final acceptance of the system. Fire alarm systems shall be installed according to NFPA Standard 72. Installation of fire alarm components, including basic wiring, may not commence befi,--Z plans are approved by the Fire Department Plan Reviewer. Fire alarm drawings must be professionally rendered, in sufficient detail, and must be internally consistent. Riser diagrams must match installation plans and load calculations. Components must be listed and approved for use together. Changes to plans must include new drawings and calculations and must be approved by the Fire Department Plan Reviewer prior to installation. Fire alarm installation is subject to field inspection by a Fire Department Inspector. An approved set of plans and the Building Department electrical permit must be present for any installation inspection. Fire alarm systems shall be installed under permit of the City of Everett Building Depattment. Electrical inspections and approval are required prior to calling for acceptance tests. Call (425) 257-8810 for permit information. The absence of working phone lines for the alarm system 1611 be cause for postponing fire department inspection and testing :and shall result in denial of occupancy. 1