3924 FEDERAL AVE 2017-04-11 - Laserfiche WebLink

11, Supports for solar modules are installed to spread the dead load across as1wrater, framing members as needed to ensure that no point load exceeds fifty(5 ❑[IRC M2302,2.1(5)] 12. The photovoltaic modules and supportingstructure shall be constructed ononcombustible materials or fire-retardant treated wood equivalent to th ❑the roof construction. [IRC M2302.2.1] 13, Roof and wall penetrations shall be flashed and sealed to prevent entry of rodents,and Insects.[IRC M2302.2,2] ❑14. PV modules are listed and labeled with a fire classification in accordance w[IRC M2302,2.3; r� Comments: If you answered yes to all of the above questions,the project qualifies for the over-the- counter permitting process. Determine if your project qualifies for an Over-the-Counter electrical permit Yes No N/A I. PE rs,and combiner boxes are identified for use in PV syAems. ❑ 2. Thed and labeled in accordance with UL 1741 and are listed for ❑utC M2302.41 3. The AC interconnection point is on the load side of service disconnect.[NEC 690.64(8)] 4. The system meets all current NEC,City and Washington Cities Electrical Code ❑ l 1 requirements. ! ff 5, For Split-Buss modules the AC interconnection must be one of the six service I ❑ ' disconnects. i 6, Maximum load added to the panelboard is based on the rating of he panelboards bus/main OCPD combination in accordance with NEC 705.12(D)(2)(3)(b),and is limited to(check combination that applies): 0225 amp bus/200 amp main OCPD-13,440 AC watts,maximum 70 amp inverter OCPD, f 25 amp bus/225 amp main OCPD- 8,640 AC watts,maximum 45 amp inverter OCPD. LIV11200amp bus/200 amp main OCPD- 7,860 AC watts,maximum 40 amp inverter OCPD, mp bus/150 amp main OCPD- 5,760 AC watts,maximum 30 amp inverter OCPD, mp bus/125 amp main OCPD- 4,800 AC watts,maximum 25 amp inverter OCPD, mp bus/100 amp main OCPD- 9,600 AC watts,maximum 50 amp inverter CCPD.