2102 OAKES AVE 2017-07-28 - Laserfiche WebLink

ffrodents, rts for solar modules are Installed to spread the dead load across as many roof- g members as needed to ensure that no point load exceeds fifty(50)pounds, ❑ [IRC2302.2.1(5)] otovoltaic modules and supporting structure shall be constructed of mbustible materials or fire-retardant treated wood equivalent to that required for Nr ❑ f construction. [IRC M2302.2.1] nd wall penetrations shall be flashed and sealed to prevent entry of water, l7 s,and insects.[iRC M2302,2.2] . Pmodules are listed and labeled with a fire classification in accordance with Ul.1703, J / ❑ [IRC M2302.2.3] 'Vr Comments: If you answered yes to all of the above questions,the project qualifies for the over-the- counter permitting process. ! Determine if your project qualifies for an Over-the-Counter electrical permit Yes No N/A 1. PV modules,Inverters,and combiner boxes are identified for use in PV systems, Nr ❑ 2. The Inverters are listed and labeled In accordance with UL 1741 and are listed for utility Interaction.[IRC M2302.41 3. The AC interconnection point is on the load side of service disconnect.[NEC 690.64(B)] 4. The system meets all current NEC,City and Washington Cities Electrical Code requirements. 5. For Split-Buss modules the AC Interconnection must be one of the six service O disconnects. 6. Maximum load added to the panelboard Is based on the rating of the panelboards bus/main OCPD combination In accordance with NEC 705,12(1))(2)(3)(b),and Is limited to(check combination that applies): 0225 amp bus/200 amp main OCPD-13,440 AC watts,maximum 70 amp inverter OCPD. 0225 amp bus/225 amp main OCPD- 8,640 AC watts,maximum 45 amp Inverter OCPD. V1200 amp bus/200 amp main OCPD- 7,860 AC watts,maximum 40 amp Inverter OCPD. E3150 amp bus/150 amp main OCPD- 5,760 AC watts,maximum 30 amp inverter OCPD. ❑125 amp bus/125 amp main OCPD- 4,800 AC watts,maximum 25 amp Inverter CCPD. ❑125 amp bus/100 amp main OCPD- 9,600 AC watts,maximum 50 amp Inverter OCPD.