Laserfiche WebLink
IPrecision General Commercial Contractors, Inco <br /> TRADES AFFECTED: <br /> Framer <br /> SUGGESTED RESPONSE: <br /> SUBMITTED BY: Reid Patterson DATE: 8-5-2016 <br /> RESPONSE REQUESTED BY: <br /> RESPONSE: <br /> RESPONSE BY: Dennis Titus, PE, SE DATE: 08.15.16 <br /> 1. The beams do not need to be PT since they are protected from exposure to moisture. <br /> 2. The columns may be spliced at the deck level. Use a Simpson BC8 connector at the splice <br /> locations. <br /> 3. The(2) layers of plywood are for fire proofing. The lower layer shall be 3/4"CDX and the upper <br /> shall be 3/4"ACX. <br /> 4. All damaged ledgers and blocking shall be replaced,as shown on detail 4/S3.1. Undamaged <br /> ledgers may remain and be reused. <br /> The joists shall be sloped. However, the contractor shall have the option to rake-cut the joists out <br /> of 2x 12's if that is the preferred method. If the joists are rake cut they shall have a minimum depth of 9". <br /> Precision GCC, Inc./RFI/12232010/BLC G9 4' <br />