Laserfiche WebLink
Clark Park Updates Option 5R2- US Communities, all new equipment, Full Install, Tile Surfacing <br />QUOTE <br />#64223 <br />11/08/2017 <br />--- RUBBER TILE SPECIAL CONDITIONS ----- <br />The following items apply unless otherwise noted: <br />* GTlmpax Rubber Tile Safety Surfacing is IPEMA-certified and meets the requirements of ASTM and CPSC for impact attenuation and ADA <br />accessibility. <br />* Subbase must meet GTlmpae Architectural Specification for appropriate preparation. <br />* Tiles are 24" x 24" square; tile thickness is as specified on quotation. <br />* Materials arrive wrapped and palletized. Pallets are extremely heavy (up to 2000 pounds each); a forklift is required for offloading. Liftgate <br />service may be available for an additional charge. <br />* Standard Tiles are designed for glue-dowii installation over a hard surface (concrete or asphalt). Interlocking tiles and geotextile are required if <br />tiles are being installed over a compacted crushed rock subbase. Crushed rock should be compacted 95% WITH WATER USED DURING <br />COMPACTING. For proper surfacing drainage, a 1% slope on the subbase is required. <br />* Adhesive quantity is based on a coverage rate of 40 square feet per gallon, for adhesion of bottoms of tiles to subsurface. Rough surfaces, <br />Porous Asphalt or porous concrete will need 2x the adhesive. Notify SiteLines if these conditions exist for a requote with proper adhesive <br />quantities. <br />* Installation of tiles is weather -sensitive and requires dry, 45-degree temperatures. The optimal time of year to install them in most areas is April <br />15th through October 15th. <br />*Current lead times for tiles arc approximately 8-10 weeks manufacturing time, plus shipping time. <br />Page 3 of 6 <br />